Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...
  • 1 month later...

I now have a time for Wakefield. 1.20.06 using iPhone app. I was getting consistent 20's, very happy considering Duncan's 1.15 is with lot more skill and power. Something to aim for!

Mostly stock rs4s on street tyres. Just hks suspension, r34 front brakes and exhaust.

Good job Ryan!

I hope to get down there sometime and put in a lap time too.

I've added you in my spreadsheet, and once we get a few more updates, I'll get a mod to update thumbsup.gif

RB2.8L engine,

N1 block,

HKS step 3 2.8L kit (HKS pistons, rods and crank),

Garrret Gtx4294r turbo (1.28 rear)

6boost manifold

Custom 4” dump pipe with screamer pipe

Tial 60mm external wastegate

Apexi power fc d-jetro

HKS 1.6mm drag head gasket,

HKS exhaust and intake gaskets,

HKS oil pump,

HKS cam gears,

HKS timing belt,

HKS fuel rail,

HKS 1000cc injectors,

N1 water pump,

Trust sump kit,

Tomei 280 degree 11.5mm lift drag cam shafts,

Tomei drag valve spring kit,

Tomei titanium retainers,

Tomei valve lifter,

Race cut valves,

Race valve guides,

ARP head stud kit,

ARP main stud kit,

Race main bearing kit,

Race crank bearing kit,

ATI/Ross pulley kit,

Race head port intake and exhaust,

Sard fuel pressure regulator

Trust PEII exhaust

Koyorad aluminium radiator

100mm front mount intercooler with custom piping

RB2.8L engine,

N1 block,

HKS step 3 2.8L kit (HKS pistons, rods and crank),

Garrret Gtx4294r turbo (1.28 rear)

6boost manifold

Custom 4” dump pipe with screamer pipe

Tial 60mm external wastegate

Apexi power fc d-jetro

HKS 1.6mm drag head gasket,

HKS exhaust and intake gaskets,

HKS oil pump,

HKS cam gears,

HKS timing belt,

HKS fuel rail,

HKS 1000cc injectors,

N1 water pump,

Trust sump kit,

Tomei 280 degree 11.5mm lift drag cam shafts,

Tomei drag valve spring kit,

Tomei titanium retainers,

Tomei valve lifter,

Race cut valves,

Race valve guides,

ARP head stud kit,

ARP main stud kit,

Race main bearing kit,

Race crank bearing kit,

ATI/Ross pulley kit,

Race head port intake and exhaust,

Sard fuel pressure regulator

Trust PEII exhaust

Koyorad aluminium radiator

100mm front mount intercooler with custom piping

OMG i think i just had an accident thats stagea porn lol

yeah it comes on boost about 5500-6000 and yeah i pretty much end up in the back seat and the missus refuses to get in the car lol due to the noise. and that figure is awhp and no no quarter mile time still running stock box at the moment and dont want to go there run a low time and then require a cage before can go back so want to build an OS GIKEN box for it then take it down for one night of fun and whatever it runs it runs but for a comparison brads 2.7L 600hp stagea ran a 11.3 1/4 so i would expect it to be a 10 second stagea

yeah it comes on boost about 5500-6000 and yeah i pretty much end up in the back seat and the missus refuses to get in the car lol due to the noise. and that figure is awhp and no no quarter mile time still running stock box at the moment and dont want to go there run a low time and then require a cage before can go back so want to build an OS GIKEN box for it then take it down for one night of fun and whatever it runs it runs but for a comparison brads 2.7L 600hp stagea ran a 11.3 1/4 so i would expect it to be a 10 second stagea

Psymin's 550+ awkw Stagea only ever did 12's - it takes the right set up and technique to do 10 or better not just power!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
    • Sounds good, we will aim to be there! @The Bogan I'll give you a shout if you are heading up to campbelltown for the meet too.
×
×
  • Create New...