Jump to content
SAU Community

Where's The Power Gone?


Recommended Posts

My car has lost about 85hp at the wheels, thought the motor was getting sad, but got the leak down test an compression test done both came back fine. tune still seemed good just missing power (from 385 back to bout 300)

wondering if anyone had any ideas wot it could be? thank in advance :thanks:

Link to comment
Share on other sites

Might get them to pull the exhaust off an see if it makes any difference, could be possible.. tho is there much to collapse in a 3inch metal cat..they are nearly straight thru. Wot could get stuck in the intake? hopefully the air filters get rid of anything big enough to clog an intake pipe. Dont think it would be fuel cos its a noticable difference on the road an it just dont go as good as it used to, an was the same dyno. but will get them get them to check out the exhaust. the turbo's are bout 2-3 years old garret think they're -5's running 20 psi is it very common for turbos to shit emselves or something cause them to run inefficiently?? Havent eva noticed any wierd noises when boosting. just dont seem to get the effect they used to give. something seems to be choking the engine somewhere.

Link to comment
Share on other sites

Might get them to pull the exhaust off an see if it makes any difference, could be possible.. tho is there much to collapse in a 3inch metal cat..they are nearly straight thru. Wot could get stuck in the intake? hopefully the air filters get rid of anything big enough to clog an intake pipe. Dont think it would be fuel cos its a noticable difference on the road an it just dont go as good as it used to, an was the same dyno. but will get them get them to check out the exhaust. the turbo's are bout 2-3 years old garret think they're -5's running 20 psi is it very common for turbos to shit emselves or something cause them to run inefficiently?? Havent eva noticed any wierd noises when boosting. just dont seem to get the effect they used to give. something seems to be choking the engine somewhere.

lol I pulled my intake apart on my 32 for shits and giggles and found my missing 13mm spanner in the BOV return pipe??? !!!!

85kws is a big lose, maybe a hole in the intake pipeing or small hose come off, any black smoke under full boost?

Link to comment
Share on other sites

Depending on your set up - oiled up AFM's will have that effect. If you are running a recirculation system for blow by gases and it is leaking oil out the bovs (common on GTR's) or you have re-oiled a foam air filter there is a fair chance the AFM's are messed up.

This causes them to read high - the consequence being single digit AFR's, less ignition advance and no horsepowers.

If you had it on the dyno what are the AFR's?

Link to comment
Share on other sites

have got a vipec ecu so no longer use the z32 afm's (i should pull them off an sell them..if they're worth anything 2nd hand.)

Car was dyno'd this afternoon, an mechanic thinks its a clogged exhaust. so they gunna take the cat out in the morning an re dyno it to see if thats the prob

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Me too. Apparently the new version of Invision will allow some customisation so look forward to a 'Love' reaction and a new 'Like' icon.
    • Which injectors are you using? It's likely the fuelling is off also, so as above.
    • Awesome to know. I have a Series 1, and When pulling my front bumper off for the first time i realised my reo/crash bar was a bit worse for wear, and was going to try pick up a better one soon just so i can replace it. Someone is selling a full series 2 front bar and brackets for a decent price, so was going to probably reuse my brackets and install the new second hand reo/crash bar. I also have a genuine Altia body kit to do up, spray and put on, and not sure if that will use the series 1 or series 2 brackets for the front bumper, so having both will be handy, and knowing i can drill holes out to make stuff fit between series is also handy to know!
    • I should also say that the while they are different the only parts that matter are the center headlight supports and center bar from S1 to S2. The center bar will work, but the S1 has holes that clips go through into the S1 bumper. So if you were super cheap you could simply drill the S2 bar. Same thing with the side/wings. They have slightly different 'clips' but can be made to work. The center headlight brackets however, cannot. This is also where the GTR differs, which has a different center bar, and different headlight supports (to either GTT system), it also has different 'wing' headlight supports which is what I am calling under the headlight. However those CAN be made to work with the GTT Reo for a GTR front bar by a small spacer and a drill/tapping a thread into the reo because the bolt positions are slightly different. So people only really need the center brackets to go between GTT S1, GTT S2, and GTR if you are happy to do some tinkering.
    • Indeed  😃  Appears the site is back up now (migrated not updated) - kudos @funkymonkey & @PranK
×
×
  • Create New...