Jump to content
SAU Community

Recommended Posts

  • 1 month later...
On 28/07/2016 at 11:19 AM, hrd-hr30 said:

Seems to be the Hankook Soft that goes off quickly with heat cycles. The Z214 Medium cycles very well, if Nev's experience with them over a couple of years is anything to go by.

FWIW, Nankangs ran 60.2 at Lakeside yesterday. That's 1.1sec faster than NT01 and less than 4 tenths slower than the Hankook Soft PB. Not bad for cheap rubbish in a medium compound vs probably the fastest semi available. Hell, they make NT01s look expensive! 

Not alot of options for anything wider than a 255 in 17" wheels

Was considering some Nitto 275 NT01 all around, but the Nankang AR1 255 all around might be a better option harry? Can anyone recommend a seller for the Nankang AR1 in Brisbane? or interstate even?

  • 1 month later...

Has anyone tried Achilles tyres? I have run a set of 123s and the newer atr K sport on my 33. The k sports seemed to hold up better than the 123s which were super sticky but just fell apart after a few track days. I've done 5 track days and a few thousand k's on the ksports which are now worn out. Overall I'm fairly happy with them for the price, I think they were about $1100 a set; 245 40 18 and 265 35 18 on the rear. 
Just wondering how they compare to the Nankang Ar1s and Nitto NT01?
I'm particularly interested how they hold up on a heavier car as I will be getting a 33 GTR soon.

I tried the 123s as well, only lasted 2 track days and maybe 2000km, would not buy again. Have also run ad08r, 2 track days, 15k street km and still going well above 65% tread. I now have a set of track wheels with Nankang ar1, 3 track days done and look to easily have at least another 5 days in them. They grip well from cold, last well and where cheap at $205 fitted for 265/35/18. Would be an interesting comparison with the achilles semi.

 

I wouldn't use the AR1 as a street tyre though.

 

 

Hankook Z221 in medium will last me over a year thrashing and still perform even when worn! The last set i ran from late 2016 to the end of 2017 which i worked out was probably 300-400 laps... Same tyres still did a 1.39 at EC and then blew a front the next session lol....

A mate is importing container loads of the ZESTINO tyres and getting good reviews, ill be testing their competition Semi Slick in April at this stage which is between a slick and semi... They also do the street semis which are cheap and apparently comparable to the Z222 from Hankook... Main thing is,. they are CHEAP!

I think his page is K Racing on Facebook but if anyone wants more info just PM me and ill get you in contact!

  • 1 month later...

AR1 update from me. 

I am progressively going faster and resetting my PB as the weather cools off, seems it was a bit unfair to buy the AR1 in summer and expect 2 secs straight up vs the old ones in cooler weather.  

They do wear faster than the RS-R I had and are very sensitive to pressures/heat soak. Seemingly preferring high pressures but at the same time needing to be cooled after a few hot laps with the higher pressures and camber. 

I've done 3 track days, only a few hundred k's and already they are on the tread indicators - but those first 2 days were in 35deg heat and one of those days i had busted rear sway bar end links and slide all over the place, torching the tyres in the process and still managed a small PB. 

I will either move to better semis next or look at what options I have in slicks for next season to coincide with an engine swap/power upgrade. 

 

  • 2 weeks later...

Where to after AR1s? Better semis or slicks? 

I was thinking full slicks to handle the extra grunt from an engine swap end of this year, but my problem is space. 

I don't like the big 45-50mm flares so I only fitted 25-30mm and that looks perfect with a 9" rim 255 tyre and -3.5 front camber (don't have heaps of shock clearance left). 

To go wider would mean more "poke" so what would be the next step in better semis, and if slicks, I don't fully get slick sizing so help would be great :)

better quality semi's ? Hankook's the next step up in quality and price.

my experience with AR1's to new set of 050's is circa 1 - 1.5 sec difference over a 61 - 62 sec lap

never been involved in full slicks before but would think unless go full soft option getting heat into them to take full advantage would be a problem then at the proper soft level they would last long  at all !??

Edited by bcozican

Guys in the club using mediums without issue, though they can struggle in a top 10 shoot out (1x warm up, 1x hot lap only)

but they are getting them second hand for $200 a set as they all run 18x10 on skylines or with heaps of guard work in anything else.  

  • 1 year later...

Its time for a new set of tyres so i guess i'll try the AR1s. Ebay can deliver 265/35/18s for around $300each, but is there a shop in Sydney that will supply them for something close to that?

15 hours ago, MrStabby said:

Its time for a new set of tyres so i guess i'll try the AR1s. Ebay can deliver 265/35/18s for around $300each, but is there a shop in Sydney that will supply them for something close to that?

Blair's Tyre Service Cabramatta, I have had 2x 255/40/18 fitted for under $500 (will need to dig up receipt) last year... hence, "have had".. not sure if Coronavirus has inflated the prices yet lol

  • Like 2

I've had a set of these on for the last 6 months or so - http://sailuntyre.eu/plt/R01-SPORT.html

Did the Adelaide Rally with them, and weekend driving etc. Pretty impressed, have a few track days coming up and will update

Cost effective at around $130 fitted for 235/40/18

3 hours ago, Chris32 said:

I've had a set of these on for the last 6 months or so - http://sailuntyre.eu/plt/R01-SPORT.html

Did the Adelaide Rally with them, and weekend driving etc. Pretty impressed, have a few track days coming up and will update

Cost effective at around $130 fitted for 235/40/18

Tread pattern almost looks like Ad08r

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...