Jump to content
SAU Community

Recommended Posts

Status, which wmi kits were those cars running?

I remember reading in here or elsewhere, that somebody suggested the snow kits aren't as good of quality as an aquamist kit.

If you have worked with both, which kit do you consider to be the better option in terms of quality, performance and engine safety long term?

I think the aquamist is the better kit of the bunch but a little harder to install and setup.

Not saying that there is anything "wrong" with the other kits. I myself am probably gonna go the snow performance kit as I will be installing it myself so it seems a little easier.

Seriously if you are running that much power your gunna need a pretty serious fuel system anyway..

What I am really interested to see now is a E85 fueled car with WMI..

Will it be twice as awesome, or not really..

might give it a crack if no one else does:)

I don't think it works that way ARTZ, my tuner reckons one or the other. The good thing is you can lean out your fuel a bit so it has been known to gain fuel economy as well.

So I'm told, have a read of either mafias or tridents threads on it, I think I remember one of them saying such things

I think the aquamist is the better kit of the bunch but a little harder to install and setup.

Not saying that there is anything "wrong" with the other kits. I myself am probably gonna go the snow performance kit as I will be installing it myself so it seems a little easier.

Got a snow s2 if u are looking, am needing to free up some cash atm. Could save you a neat a mount off new.

Just a short drive over to revesby ;)

How much??

Why wouldn't it work, WMI cools your intake charge, e85 cools your exhaust, the colder everything runs the harder you can push it..

Can't hurt to try it, unless somebody can show results that prove otherwise

I'm sure there would be a gain, but it would probably be close to negligible. Would be great for someone to give it a go though!

How much??

Why wouldn't it work, WMI cools your intake charge, e85 cools your exhaust, the colder everything runs the harder you can push it..

Can't hurt to try it, unless somebody can show results that prove otherwise

bugger.... i bought the dyno files home but i dont have the viewer on this laptop.

Just pulled the soarer with WMI back off the dyno and at 25 psi it made 445rwkw with intake temps averaging 20-24 degrees... it will pull that power run after run after run. It has more in it but we started getting a bit of bleed on the fuel pressure. This car is setup for circuit so it needs to be safe under all conditions so we stopped at 25psi and 445rwkw.

On 98 it would pull one run @ 380rwkw on 20psi but high intake temps held it back from running more boost.. and subsequent pulls would drop power with each pull via the AIT compensation. On 20psi it will pull 390rwkw all day with loads more mid and a near perfect power curve.

Overall timing gain was comparable to e85.

What turbo on that set up?

Did you get that directly from aquamist?

Was from a performance shop with an online store which I found while googling prices. The communication was pretty much non existant and it took close to 4 weeks to arrive.

The failsafe and triggering vavle is what made me choose it over a snow or aem unit. I'm pretty keen to see the results from it

Edited by PSI086

Add a drop of blue food colouring to the 5lt mix and you can call it windex injection. You can actually use some kinds of industrial glass cleaners too, as they contain up to 25% methanol.

Also this is something else that I find interesting...

http://www.hobbyparts.com.au/store/item/nitro004l/fuelnitromethane/

5-10% nitro is considered safe. Higher concentrations can fall out of suspension, but would probably remain in solution better if mixed with methanol first. There is quite a few threads on the waterinjection info forum about this.

Add a drop of blue food colouring to the 5lt mix and you can call it windex injection. You can actually use some kinds of industrial glass cleaners too, as they contain up to 25% methanol.

Also this is something else that I find interesting...

http://www.hobbypart...elnitromethane/

5-10% nitro is considered safe. Higher concentrations can fall out of suspension, but would probably remain in solution better if mixed with methanol first. There is quite a few threads on the waterinjection info forum about this.

Was thinking about this today, if you found a good glass cleaner with some methanol content, you could run the WMI feed directly from the washer bottle correct? (since most skylines have 3+ litre washer bottles) Leaving the only thing visible in the engine bay the injection nozzle and line.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...