Jump to content
SAU Community

Recommended Posts

Hey guys,

i have been looking through the threads and theres nothing talking about an r34 gtt lifter being noisy and creating the common ticking noise which mine has.

(lifters in an rb25 went from hydraulic to solid in the NEO when they put some gtr parts in the head for eco and performance benefits)

so was just wondering if someone has had this problem and could give me some tips in fixing it.

the noise is on the intake side of the engine so plan is to pull the rocker off and have a lookey, just wondering what to look for once i get it all apart. will the problem be very obvious orrrr???

i dont want to get all oily and what not and not know what im looking for hah.

also if anyone has done this before is there much chance of fixing this ticking without replacing shims and having to take the cam shaft off and all that?

Link to comment
https://www.sau.com.au/forums/topic/396250-r34-gtt-noise-lifter/
Share on other sites

No way to fix without changing the shims and re-doing all the clearences.

worst part of Solid lifters as it is a prick to do in Twincam direct actuation engines

In short, use feeler gauges to find any thing not within spec, remove that shim, measure it calculate how much thicker the new shim needs to be, buy a new shim that thickness and re-install.

Repeat for all 24 valves

Yes it's a real bitch of a job. I haven't done it before but the guy who built my Neo head wouldn't stop going on about how long it took him to get it to the right clearance to suit my cams. Although he may have been just saying that to charge me more labour!

No way to fix without changing the shims and re-doing all the clearences.

worst part of Solid lifters as it is a prick to do in Twincam direct actuation engines

In short, use feeler gauges to find any thing not within spec, remove that shim, measure it calculate how much thicker the new shim needs to be, buy a new shim that thickness and re-install.

Repeat for all 24 valves

That's so shit zebra haha.

So I have to do all the valves?! O.O how long do you think it'd take two people??

Hmm this is Gunna suck lol. Maybe I'll just make it a week long this and borrow the girls car for the week.

95% sure it's lifters, everyone that's heard it has told me lifters. I think it's lifters. And injectors make there own defined noise.

i was under the impression you can always hear the lifters a bit - one of the first things i noticed when i got my GT-T but everyone who i pointed it out too (and who knew their skylines) told me it was completely normal.

what oil you running?

My R34 always had a reasonably loud ticking noise from the head which wasn't the injectors, never gave me any problems! Maybe you are worrying about nothing and should leave it as is. :thumbsup:

Oil won't have any impact in this application as they are solid lifters.

i was under the impression you can always hear the lifters a bit - one of the first things i noticed when i got my GT-T but everyone who i pointed it out too (and who knew their skylines) told me it was completely normal.

what oil you running?

=

made a video of it.

yeah i know it wont hurt anything, took it to wakie on saturday and nothing has changed as i was told it wouldnt. just find it annoying, want a nice pur.

between that, the injectors going off there head and the gates timing belt (that you strangly cant hear in the video) its just frustrating haha.

although if i have to change all the shims i think i will just leave it as ive been told its completely fine.

hey I would rather a slight tick and the valve being closed rather then some 1 not knowing how to do it properly and shimming them too much so that they now don't close 100%. Thats just my take on it though. that and unless it sounds like a chaff cutter I wouldn't do mine ever again. just saying

mine used to get a little noisy using nulon oil

changed to gulf western sougi and it was heaps better, now its hard to get sougi so i just use the gw synx-3000 and change it every 5000 kms

try some different oils and see how it goes, the gates belt will be noisy because they use a harder material for the face of the belt and they take a while to bed in

might be worth taking the lids off and check under the rocker covers just in case tho, not overly hard to do and good for peace of mind

Oh that sounds horrible :P worth fixing I think.

Also, you sure the timing belt tension is correct?

=

made a video of it.

yeah i know it wont hurt anything, took it to wakie on saturday and nothing has changed as i was told it wouldnt. just find it annoying, want a nice pur.

between that, the injectors going off there head and the gates timing belt (that you strangly cant hear in the video) its just frustrating haha.

although if i have to change all the shims i think i will just leave it as ive been told its completely fine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...