Jump to content
SAU Community

Recommended Posts

OS twins are scrub too.

The larger input shaft is nice but isn't that necessary. I had to upgrade my clutch hub which was available for my Carbonetic twin clutch. Fits good.

I don't think they can mix much but PPG 1-3 dog and 4-5 synchro (or was it 1-4 dog) was a kit I thought and is ok on the street. Big power most times need big gearbox sadly.

OS twins are scrub too.

The larger input shaft is nice but isn't that necessary. I had to upgrade my clutch hub which was available for my Carbonetic twin clutch. Fits good.

I don't think they can mix much but PPG 1-3 dog and 4-5 synchro (or was it 1-4 dog) was a kit I thought and is ok on the street. Big power most times need big gearbox sadly.

Yeah, that's what the guy I'm talking to said he could do. 1-4 dog straight and 5th helical synchro.

I need to drive one to get some sort of idea of what these dog boxes are about.

Just throw a rb20 box behind it and forget using ya front wheels, guaranteed to hold as much HP ya can throw at it :P

lol but on a serious note go the PPG 1st-4th dog and 5th helical synchro. There's honestly nothing to them. You dont have to drive them hard or abusive as so many people say, it does them no harm driving the PPG dogs softly. Ive driven one personally in a mates old r33 26/30 GTR. Was intially a little strange and kinda didnt like it but as the day went on and I got use to it, it grew on me. Although I will admitt im unsure of servicing costs. He had it 2yrs/20,000 odd km's with no hickups supporting around the 500kw mark in that time. This is probably useless info to you paul but thought id voice my opinion haha.

Now back to the BEERS! :)

http://www.rhdjapan.com/os-giken-close-gear-kit-5-speed-nissan-rb26dett-input-shaft.html

$
2800 Paul, not sure what you're looking for but that's a pretty decent price.

I think I am going to do if it stays like that a little while!

http://www.rhdjapan.com/os-giken-close-gear-kit-5-speed-nissan-rb26dett-input-shaft.html

$2800 Paul, not sure what you're looking for but that's a pretty decent price.

I think I am going to do if it stays like that a little while!

he just broke one of them

http://www.rhdjapan.com/os-giken-close-gear-kit-5-speed-nissan-rb26dett-input-shaft.html

$2800 Paul, not sure what you're looking for but that's a pretty decent price.

I think I am going to do if it stays like that a little while!

As Brett said. Also, good luck getting one. A fellow member has had one on order since June I think. Delay, delay, delay.

I just got a lengthy email back from PPG. Gonna call him on Monday and organise to fly down to Adelaide and drive the different boxes. He said that the helical, synchro set will do the job but really is pushing the dog set. He owns a GTR with that box in it. Been in the car for 6 years/40,000 kms and its all sweet.

Interested to hear how it goes. I'm looking at the 6 speed PPG dog set at the moment to replace the standard getrag gear - waiting on pricing back and how customisable the ratios are.

Like you have never driven a dog box but street manners less important for me - it's already a pig on the street!

Interested to hear how it goes. I'm looking at the 6 speed PPG dog set at the moment to replace the standard getrag gear - waiting on pricing back and how customisable the ratios are.

Like you have never driven a dog box but street manners less important for me - it's already a pig on the street!

From what I can gather, I don't think they like to budge on the ratios they have on offer.

Ill sit down and work out the difference between standard 34 ratios and the PPG ratios, then throw in what they are on 4.11's.

Yeah, that's what the guy I'm talking to said he could do. 1-4 dog straight and 5th helical synchro.

I need to drive one to get some sort of idea of what these dog boxes are about.

I have one of the early 1-4 helical PPG gearsets... Good thing and once you learn to drive a non syncro box it's a lot more rewarding to drive. Plus if my missus can drive it successfully, anyone can.

OS triple is the worlds most brutal and hardest clutch to drive. I had one and was absolute rubbish.

... ba ha ha ha ha ha. Once you set the pedal height properly, it's not really that bad. I've driven much worse.

... again, if my missus can drive it in traffic... you must be doing something wrong.

Just a note on input shafts.. I opted to leave my input shaft stock. I look at it as a fusible link, as my clutch is unlikely to slip too much... so the stock shaft provides some protection to my gear set if serious shock loading occurs.

Cheers

Justin

  • Like 2

I have one of the early 1-4 helical PPG gearsets... Good thing and once you learn to drive a non syncro box it's a lot more rewarding to drive. Plus if my missus can drive it successfully, anyone can.

... ba ha ha ha ha ha. Once you set the pedal height properly, it's not really that bad. I've driven much worse.

... again, if my missus can drive it in traffic... you must be doing something wrong.

Just a note on input shafts.. I opted to leave my input shaft stock. I look at it as a fusible link, as my clutch is unlikely to slip too much... so the stock shaft provides some protection to my gear set if serious shock loading occurs.

Cheers

Justin

i wish to like your post more than once

I have one of the early 1-4 helical PPG gearsets... Good thing and once you learn to drive a non syncro box it's a lot more rewarding to drive. Plus if my missus can drive it successfully, anyone can.

... ba ha ha ha ha ha. Once you set the pedal height properly, it's not really that bad. I've driven much worse.

... again, if my missus can drive it in traffic... you must be doing something wrong.

Just a note on input shafts.. I opted to leave my input shaft stock. I look at it as a fusible link, as my clutch is unlikely to slip too much... so the stock shaft provides some protection to my gear set if serious shock loading occurs.

Cheers

Justin

So you reckon the dogs ain't that bad?

I've spoken to PPG the other day, damn long phone call. He is getting back to me with pricing on the straight cut synchro IF they're willing to do it.

The guy I'm dealing with has the helical dog set in his own GTR and loves it. Just need to drive one to see what the go is.

I have one of the early 1-4 helical PPG gearsets... Good thing and once you learn to drive a non syncro box it's a lot more rewarding to drive. Plus if my missus can drive it successfully, anyone can.

... ba ha ha ha ha ha. Once you set the pedal height properly, it's not really that bad. I've driven much worse.

... again, if my missus can drive it in traffic... you must be doing something wrong.

Just a note on input shafts.. I opted to leave my input shaft stock. I look at it as a fusible link, as my clutch is unlikely to slip too much... so the stock shaft provides some protection to my gear set if serious shock loading occurs.

Cheers

Justin

Is your missus a race car driver?? :P
  • Like 1

at least put a 6 litre in it :P

Pfft, 6 ltr, that's to small, 9.4 litres is where its at.

> http://www.proformanceunlimited.com/specs/572_750.html

And for well under 25k dropped at your door.

Pfft, 6 ltr, that's to small, 9.4 litres is where its at.

> http://www.proformanceunlimited.com/specs/572_750.html

And for well under 25k dropped at your door.

Don't swear at me, Mark :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The team at OBD2 Australia are pretty good, shoot them an email and ask them. I've dealt with them before for work stuff. I'd be shocked if it didn't work, so long as Consult can activate the ABS. But you might need to use KLine for it which would be the stopper, as I don't think that piece does KLine comms.
    • Yeah and hence my ghetto way of slamming the brakes, get the ABS to cycle, rebleed seems to be a sensible workaround.
    • Hey! Happy to help. Nothing inherently wrong with the adapter, it's more so with Brett Collins himself. He gave me a lot of incorrect information when I was in contact with him and was extremely rude when I challenged him. He stated I could not use any aftermarket twin plate clutches except for his own, not to use the dush shield, bla bla bla and it was all BS.  Collins stated to cut roughly 14mm's off the housing, I took off 15mm to make room for the dust shield. I would confirm with whatever adapter manufacturer you're using. 
    • There's plenty of OEM steering arms that are bolted on. Not in the same fashion/orientation as that one, to be sure, but still. Examples of what I'm thinking of would use holes like the ones that have the downward facing studs on the GTR uprights (down the bottom end, under the driveshaft opening, near the lower balljoint) and bolt a steering arm on using only 2 bolts that would be somewhat similarly in shear as these you're complainig about. I reckon old Holdens did that, and I've never seen a broken one of those.
    • Let's be honest, most of the people designing parts like the above, aren't engineers. Sometimes they come from disciplines that gives them more qualitative feel for design than quantitive, however, plenty of them have just picked up a license to Fusion and started making things. And that's the honest part about the majority of these guys making parts like that, they don't have huge R&D teams and heaps of time or experience working out the numbers on it. Shit, most smaller teams that do have real engineers still roll with "yeah, it should be okay, and does the job, let's make them and just see"...   The smaller guys like KiwiCNC, aren't the likes of Bosch etc with proper engineering procedures, and oversights, and sign off. As such, it's why they can produce a product to market a lot quicker, but it always comes back to, question it all.   I'm still not a fan of that bolt on piece. Why not just machine it all in one go? With the right design it's possible. The only reason I can see is if they want different heights/length for the tie rod to bolt to. And if they have the cncs themselves,they can easily offer that exact feature, and just machine it all in one go. 
×
×
  • Create New...