Jump to content
SAU Community

Recommended Posts

OS twins are scrub too.

The larger input shaft is nice but isn't that necessary. I had to upgrade my clutch hub which was available for my Carbonetic twin clutch. Fits good.

I don't think they can mix much but PPG 1-3 dog and 4-5 synchro (or was it 1-4 dog) was a kit I thought and is ok on the street. Big power most times need big gearbox sadly.

OS twins are scrub too.

The larger input shaft is nice but isn't that necessary. I had to upgrade my clutch hub which was available for my Carbonetic twin clutch. Fits good.

I don't think they can mix much but PPG 1-3 dog and 4-5 synchro (or was it 1-4 dog) was a kit I thought and is ok on the street. Big power most times need big gearbox sadly.

Yeah, that's what the guy I'm talking to said he could do. 1-4 dog straight and 5th helical synchro.

I need to drive one to get some sort of idea of what these dog boxes are about.

Just throw a rb20 box behind it and forget using ya front wheels, guaranteed to hold as much HP ya can throw at it :P

lol but on a serious note go the PPG 1st-4th dog and 5th helical synchro. There's honestly nothing to them. You dont have to drive them hard or abusive as so many people say, it does them no harm driving the PPG dogs softly. Ive driven one personally in a mates old r33 26/30 GTR. Was intially a little strange and kinda didnt like it but as the day went on and I got use to it, it grew on me. Although I will admitt im unsure of servicing costs. He had it 2yrs/20,000 odd km's with no hickups supporting around the 500kw mark in that time. This is probably useless info to you paul but thought id voice my opinion haha.

Now back to the BEERS! :)

http://www.rhdjapan.com/os-giken-close-gear-kit-5-speed-nissan-rb26dett-input-shaft.html

$
2800 Paul, not sure what you're looking for but that's a pretty decent price.

I think I am going to do if it stays like that a little while!

http://www.rhdjapan.com/os-giken-close-gear-kit-5-speed-nissan-rb26dett-input-shaft.html

$2800 Paul, not sure what you're looking for but that's a pretty decent price.

I think I am going to do if it stays like that a little while!

he just broke one of them

http://www.rhdjapan.com/os-giken-close-gear-kit-5-speed-nissan-rb26dett-input-shaft.html

$2800 Paul, not sure what you're looking for but that's a pretty decent price.

I think I am going to do if it stays like that a little while!

As Brett said. Also, good luck getting one. A fellow member has had one on order since June I think. Delay, delay, delay.

I just got a lengthy email back from PPG. Gonna call him on Monday and organise to fly down to Adelaide and drive the different boxes. He said that the helical, synchro set will do the job but really is pushing the dog set. He owns a GTR with that box in it. Been in the car for 6 years/40,000 kms and its all sweet.

Interested to hear how it goes. I'm looking at the 6 speed PPG dog set at the moment to replace the standard getrag gear - waiting on pricing back and how customisable the ratios are.

Like you have never driven a dog box but street manners less important for me - it's already a pig on the street!

Interested to hear how it goes. I'm looking at the 6 speed PPG dog set at the moment to replace the standard getrag gear - waiting on pricing back and how customisable the ratios are.

Like you have never driven a dog box but street manners less important for me - it's already a pig on the street!

From what I can gather, I don't think they like to budge on the ratios they have on offer.

Ill sit down and work out the difference between standard 34 ratios and the PPG ratios, then throw in what they are on 4.11's.

Yeah, that's what the guy I'm talking to said he could do. 1-4 dog straight and 5th helical synchro.

I need to drive one to get some sort of idea of what these dog boxes are about.

I have one of the early 1-4 helical PPG gearsets... Good thing and once you learn to drive a non syncro box it's a lot more rewarding to drive. Plus if my missus can drive it successfully, anyone can.

OS triple is the worlds most brutal and hardest clutch to drive. I had one and was absolute rubbish.

... ba ha ha ha ha ha. Once you set the pedal height properly, it's not really that bad. I've driven much worse.

... again, if my missus can drive it in traffic... you must be doing something wrong.

Just a note on input shafts.. I opted to leave my input shaft stock. I look at it as a fusible link, as my clutch is unlikely to slip too much... so the stock shaft provides some protection to my gear set if serious shock loading occurs.

Cheers

Justin

  • Like 2

I have one of the early 1-4 helical PPG gearsets... Good thing and once you learn to drive a non syncro box it's a lot more rewarding to drive. Plus if my missus can drive it successfully, anyone can.

... ba ha ha ha ha ha. Once you set the pedal height properly, it's not really that bad. I've driven much worse.

... again, if my missus can drive it in traffic... you must be doing something wrong.

Just a note on input shafts.. I opted to leave my input shaft stock. I look at it as a fusible link, as my clutch is unlikely to slip too much... so the stock shaft provides some protection to my gear set if serious shock loading occurs.

Cheers

Justin

i wish to like your post more than once

I have one of the early 1-4 helical PPG gearsets... Good thing and once you learn to drive a non syncro box it's a lot more rewarding to drive. Plus if my missus can drive it successfully, anyone can.

... ba ha ha ha ha ha. Once you set the pedal height properly, it's not really that bad. I've driven much worse.

... again, if my missus can drive it in traffic... you must be doing something wrong.

Just a note on input shafts.. I opted to leave my input shaft stock. I look at it as a fusible link, as my clutch is unlikely to slip too much... so the stock shaft provides some protection to my gear set if serious shock loading occurs.

Cheers

Justin

So you reckon the dogs ain't that bad?

I've spoken to PPG the other day, damn long phone call. He is getting back to me with pricing on the straight cut synchro IF they're willing to do it.

The guy I'm dealing with has the helical dog set in his own GTR and loves it. Just need to drive one to see what the go is.

I have one of the early 1-4 helical PPG gearsets... Good thing and once you learn to drive a non syncro box it's a lot more rewarding to drive. Plus if my missus can drive it successfully, anyone can.

... ba ha ha ha ha ha. Once you set the pedal height properly, it's not really that bad. I've driven much worse.

... again, if my missus can drive it in traffic... you must be doing something wrong.

Just a note on input shafts.. I opted to leave my input shaft stock. I look at it as a fusible link, as my clutch is unlikely to slip too much... so the stock shaft provides some protection to my gear set if serious shock loading occurs.

Cheers

Justin

Is your missus a race car driver?? :P
  • Like 1

at least put a 6 litre in it :P

Pfft, 6 ltr, that's to small, 9.4 litres is where its at.

> http://www.proformanceunlimited.com/specs/572_750.html

And for well under 25k dropped at your door.

Pfft, 6 ltr, that's to small, 9.4 litres is where its at.

> http://www.proformanceunlimited.com/specs/572_750.html

And for well under 25k dropped at your door.

Don't swear at me, Mark :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Lets say I wanted to buy this, specifically for this purpose. How do I actually perform the function. Can I still buy a Consult-1? Am I about to be burned by the fact my car is a 2000 model Series 2 R34 and thus will be some stupid other system? Do I just need this -> https://obd2australia.com.au/product/nissan-consult-14-pin-to-usb-ddl-diagnostic-interface-with-ftdi-ft232r-chip/ And with what software?
    • That's probably OK. That's a face to face compression joint between two surfaces with the clamping load provided by those bolts. So.... it's unlikely that the bolts will end up feeling that load in shear, unless the clamping surfaces are not large enough, bolts not got enough tension on them, etc etc to prevent the two faces from moving wrt each other. Which... I would hope the designers have considered, seeing as it's probably one of the most important things the upright has to do apart from resist collapsing in its own right. But yes, it would definitely be worth asking them what their safety factor on that part of the design was. I tend to think that the casting, being a casting, is not necessarily the strongest bit of material in the world. It's about an inch square, and when you think about the loads that are being put into it, you have to wonder what safety factor the Nissan boys (and every other OEM engineer who has designed all the millions of other uprights that look essentially the same) used to account for defective casting, aging, severe impacts on the wheel, etc etc. 
    • Those bolts would be orders of magnitude stronger that cast aluminium though.  And its mainly clamping force, not shear they are dealing with?
    • Except all that twisting force that is breaking a cast piece, appears to be going through 4 bolts in the picture Johnny posted of the BryPar one...
    • The smart approach is to use the gearbox loom from the manual car. Makes it a lot easier - just plugs into the switches on the box and plugs into the main loom up near the fusebox. Then you only need to deal with bypassing the inhibit switch. The other approach requires you to use the wiring diagram to identify those wires by colour and location, perhaps even indulging in a little multimeter action to trace them end to end to make sure, and then.... you will have the answers you need. The R34 wiring diagram is available on-line (no, I do not have a link to it myself - I would have to do a search if I wasn't able to go to the copy I have at home).
×
×
  • Create New...