Jump to content
SAU Community

Recommended Posts

Yeah, Wiggins. 5 in total. Blown cooler pipes are no longer (unless the plenum one pops). No more taking front bars off!

Thinking about painting the airbox black, cutting a hole in the top of it and using the factory airbox snorkel to feed the box too. Can't hurt!?

Silicone is good for 40 psi or so, you will be fine !

Looking GOOD brother!

I like how they ran your piping. Mine is out to the side to make room for the PS reservoir and such, but I like yours a lot. Hypertune is top-notch stuff! I am always leary of 100% solid connections to the coolers because it seems they might induce stress on the piping and turbo manifolds when the engine torques around, but they don't have anything that looks as sexy as that to be honest!

Looking GOOD brother!

I like how they ran your piping. Mine is out to the side to make room for the PS reservoir and such, but I like yours a lot. Hypertune is top-notch stuff! I am always leary of 100% solid connections to the coolers because it seems they might induce stress on the piping and turbo manifolds when the engine torques around, but they don't have anything that looks as sexy as that to be honest!

http://youtu.be/76CEWVXru3M

Have a look. They move around quite a fair bit. More than enough when all combined I'd say. :)

My fabricator is trying to talk me out of going aluminium piping, those pics just about sealed the deal for me :) looks great. I'll need to do some reading on these so called Wiggins clamps

There isn't much you need to know, they are bright purple and very racecar. Just open up your wallet and prepare for butthurt when you hear the price.

On topic, I cannot wait for this to be done. The EFR looks very at home in there that's for sure.

My fabricator is trying to talk me out of going aluminium piping, those pics just about sealed the deal for me :) looks great. I'll need to do some reading on these so called Wiggins clamps

Adel Wiggins clamps. They're actually aviation gear but can be used in automotive applications also. They're a bit of a homo colour but they're that colour so plane guys can see them.

Make sure you're sitting down when you see the price.

What's wrong with alloy piping? Does he want to use stainless?

Yeah we use them at work (I work in an aviation environment) and they are used for everything. If they can handle bleed air straight from a turbine compressor (80+ psi and a couple of hundred degrees Celsius) then they should stop a cooler pipe coming off ;)

You should ask about having them lockwired piggaz. Just for some extra security/piece of mind.

Yeah we use them at work (I work in an aviation environment) and they are used for everything. If they can handle bleed air straight from a turbine compressor (80+ psi and a couple of hundred degrees Celsius) then they should stop a cooler pipe coming off ;)

You should ask about having them lockwired piggaz. Just for some extra security/piece of mind.

Lock wired is a bit too much. I really can't see these blowing off with 30-35 psi considering they're rated to 150-200 psi or something. If they do then there would be another issue like a busted engine mount.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...