Jump to content
SAU Community

Recommended Posts

Front bar was on the car straight from japan !

Thanks mate, but this isn't particularly helpful. Pretty much just said 'my discontinued front bar is genuine'. Was it a factory upgrade or aftermarket from nismo? If you know that is. Cheers

Edited by Four - Twelve

Thanks mate, but this isn't particularly helpful. Pretty much just said 'my discontinued front bar is genuine'. Was it a factory upgrade or aftermarket from nismo? If you know that is. Cheers

Yeh aftermarket Nismo, here's the warranty and fitting instructions

post-93096-0-77225200-1346496090_thumb.jpgpost-93096-0-86447000-1346496124_thumb.jpg

^^ Ok cheers, pretty lucky for you as genuine articles are reasonably sought after. I wasn't questioning its authenticity or anything so I hope you weren't taking it that way. The purpose of my initial question was because I have been seeing what seems like every second 34R with this style of front bar (including a few at WTAC) and as far as I'm aware, they weren't a factory upgrade. I know the Z-tune bar is commonly copied but I am not sure if the R-tune was or not. So ultimately I was trying to find if they are recreated locally or all genuine from Japan. Thanks for addressing my post though, I appreciate it

It's part of the VIN, my Vin is BNR32 100219

The 100 means nismo edition, and the 219 is the build number.

Each special edition gtr, the first 3 numbers identifys what type it is, there's a different number for the N1's, Nismo's and the vspecs.

I had em all written down at home somewhere but I'm 2000km away from home for work for the next 5 weeks. So no pictures, but i can get some when I return if I remember.

The only difference with my car is, all the nismos came in gun grey, my car has been resprayed just before I brought it. It's still a Nissan color, but not the gun grey. One day when I'm old and wise, it will b pulled down and full resprayed back to its gun grey nismo color. But not for a long while.

Hopefully be on the car by next week... :wub:

Damn youuu *shakes fist*

Id love to have a set of LM's on the GTR, but hard to come by a set in the right sizes.......oh and you know.....money and stuffs :rolleyes:

What sizes are they?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...