Jump to content
SAU Community

Using Two Oil Sandwich Plates?

JustinP

By JustinP,
in Engines & Forced Induction

 Share

Recommended Posts

JustinP Mentor

JustinP

Posted
Posted

Has anyone used two oil sandwich plates before (on top of the stock oil warmer / cooler) and has it caused any clearance issues with the fitment of the oil filter? My skyline is in a million pieces (engine out) at the moment so I can't have a look and estimate the clearance.

I know it's not ideal using two as its just another point of failure / leaks, but it will make my life easier :P

Cheers

Justin

Link to comment
https://www.sau.com.au/forums/topic/402155-using-two-oil-sandwich-plates/
Share on other sites
JustinP Mentor

JustinP

Posted
  • Author
Posted

No I mean two sandwich plates in addition to the stock oil warmer / cooler. I have an oil cooler to install with a built in thermostat in the sandwich plate, so it doesn't have room for the 1/8" NPT sensor holes. I need to install an oil pressure sensor and will possibly install another oil temp sensor down the track so i will need a second sandwich plate with the sensor holes.

I realise I could get rid of the factory oil pressure sensor and install the new one there, but then I would need to find a BPT to NPT adapter to fit it, and the (crap) factory oil pressure gauge would stop working, which whilst pretty much useless would annoy me to not have it working. I think you can get a BPT adapter with a tap for both a BPT and NPT sensor, but I havent been able to find one anywhere.

JustinP Mentor

JustinP

Posted
  • Author
Posted

Ok, most common thing to do is get a relocator kit. Then the oil filter relo plate has the bungs u require

That is the third and probably smartest option :) - but if I did want to do go with the 2 sandwich plates do you think I would have a clearance issue between the oil filter and the drivers side wheel arch? As my engine in not in the car I cant visualise it.

I am just looking the oil filter now and I do use the smaller R34 type ones, so I am pretty sure there will be plenty of room.

JustinP Mentor

JustinP

Posted
  • Author
Posted

Can't you just drill and tap some holes in the thermo sandwich plate?

I thought of that but there is only a small area where that might be possible, and its kinda recessed and on an angle:

http://www.racerpartswholesale.com/product/1597/Mocal_Sandwich_Plate

Not sure it how well it would work.

roba Enthusiast

roba

Posted
Posted

I use two on my boat.

one for oil supply from dry sump + sensors

one mocal sandwich plate for thermostat - attached to heat exchanger

No dramas in terms of "its just another point of failure / leaks"

Not sure on clearance issues tho...

post-29626-0-81291700-1339281354_thumb.jpg

JustinP Mentor

JustinP

Posted
  • Author
Posted

I use two on my boat.

one for oil supply from dry sump + sensors

one mocal sandwich plate for thermostat - attached to heat exchanger

No dramas in terms of "its just another point of failure / leaks"

Not sure on clearance issues tho...

Using an RB25 in a boat = awesome! :P

I'm going to order one of the Just Jap items linked to above, I think clearance will be fine.

Thanks everybody.

  • 3 years later...
V28VX37 Veteran

V28VX37

Posted
Posted

Hi all, I've just ordered a Driftworks oil cooler kit with the Mocal thermostatic sandwich plate, which doesn't have sensor points.

I have an existing sandwich plate for Defi sensors and I'm wondering if I can run both at the same time? The car is an R34 GTT with the Neo engine and standard small Ryco Z422 filter.

The other option is to add an extender piece (?) between the oil cooler sandwich plate and the braided line where you can hook the sensors but I'm not sure if such a part exists?

Kinks Grand Master

Kinks

Posted
Posted

1/8 npt into 1/8 bpt won't seal?

NOPE

the threads are incompatible, but they are close enough that you can force it in. however that means you have over stressed some of the threads and it could develop a leak at any time. Which is probably a bad idea if you use it where you care about the quality of the seal, for example.. in a pressurised oil feed!

to answer the original question, in a GTT I don't see how clearance could be an issue. I reckon you could stack 5 or 6 sandwich plates before you have any issues.. there's a ton of room!

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Rezz
      First time Skyline owner

      By Rezz · Posted

      Echo the awesome sentiment 👍 Definitely a car worth saving. Looking forward to seeing updates as well. 
    • Matt Z
      SAU NSW - Chickos Cruise

      By Matt Z · Posted

      Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • MBS206
      "Cheap" bolt on turbo on RB25DET NEO

      By MBS206 · Posted

      It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
    • tylink720
      "Cheap" bolt on turbo on RB25DET NEO

      By tylink720 · Posted

      The maxpeedingrods turbo is cheap and bolts on to stock parts. I think you just need a bigger silicone coupler for the intake. Its a cheap china turbo, but it's been running on mine for almost 3 years at 16-19 psi.
    • MBS206
      Strange issue RB25DET wont start

      By MBS206 · Posted

      What do they look like right after you've tried to start it with everything connected? Also post photos of what they actually look like.
×
×
  • Create New...