Jump to content
SAU Community

Recommended Posts

Ignore my previous post, I just answered my own question by reading this thread again. lol

I'm gonna pay the $190 for the DT which includes a timed session as well.

Yep.

  • Replies 280
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Does this mean I need to buy and fit a front tow hook?

"h) All vehicles must have tow hooks fitted. Subaru WRX MY 01 onwards competitors

must ensure that their tow hook is fitted to the front of the car prior to scrutiny."

I hope not, cause it's gonna be a b*tch of a job..

there should be a factory one up under the front bar.

make sure you know where it is as they will prob ask you during scruit.

oh and make sure you fire ext is under 3 years old not 5 like it used to be, I have to replace mine after the last PI.

I just entered driver training, hopefully there is a spot left.

I have to fit a nylon tow strap as the stock one is no more and I will need an extinguisher too, other than that i'm unsure what the bonnet requirements are, can I tie it down somehow or do I need to fit some kind of pins? I would prefer to not drill holes in the bonnet...

if you have an OEM bonnet for a 1988 or newer car you have 2 locking mech and are fine.

ie the latch under the dash and the 2nd one when you flip the lever under the bonnet.

In :)

The previous owner of my N15 said last time he was at PI, the double bonnet latch wasnt enough, and had to use a make-shift "bunnings special" carabiner on steel rope as a secondary measure. I will be making one up just incase

In :)

The previous owner of my N15 said last time he was at PI, the double bonnet latch wasnt enough, and had to use a make-shift "bunnings special" carabiner on steel rope as a secondary measure. I will be making one up just incase

They changed the wording in the CAMS regs, if the bonnet has two devices stock. It's fine.

They changed the wording in the CAMS regs, if the bonnet has two devices stock. It's fine.

I know which id prefer to have holding my bonnet if it popped up, especially at a track as fast as PI.

Hey just noticed on the WRX club website 'pending' against my name... is that because they haven't processed payment - or another reason?

that the one, just means they have either not charged your CC or they have not checked off your Direct deposit against your entry.

I know which id prefer to have holding my bonnet if it popped up, especially at a track as fast as PI.

:dry:

The whole catch would have to fail, very unlikely. Then do you think the 8mm bunnings wire that most people use as a secondary will hold the surface area of the bonnet at 200kmh...Don't think so.

In part this would have been why CAMS changed the ruling.

I've heard of R33 bonnets fly up before only being held by by the 2nd restraint. 8mm wire is pretty strong and it stops the bonnet low enough you won't have the 'whole' surface area of the bonnet acting on it.

My thinking was it was there for 2 seperate 'systems' to stop brain fade. I'm glad I've got my pins, still sometimes I need to double check on the dummy grid I haven't forgot :)

Oh well if it's not needed it's one less thing for people to do for their first track day.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...