Jump to content
SAU Community

Recommended Posts

Good afternoon Benjamin,

I have reason to believe you may have taken ownership of an R33 GT-R recently and, perhaps more importantly, this car may be of a higher specification than many others. 

Would you be so kind as to share some images and details of the car in question such that we may all enjoy its beauty and outstanding quality? 

Cordially yours, 

Dan.

Edited by ActionDan
  • Haha 7
  • 3 months later...

This week we are working on the nightmare of mounting the EFR. There is NO room in an S15 engine bay.

To anyone reading thinking of using any bigger than dual 38mm gates on an SR, don't!!! You will end up panelbeating your car to make it work. Thankfully, we have millimetres to spare and don't have to do that.

The wastegates are in the way of the turbo drain adapter, so this will be sorted with an Aeroflow 8 orb to 10an swivel adapter arriving this week. Speedflow wastegate fittings are ordered so we can plan our route to the MAC valve, and after that finish the remainder of fabrication in the engine bay. The next hurdle will be the NASA fuel system which will take a LOT of hours to sort out  : | .

Looking forward to refitting the interior, front bumper and taking it to the tuner.....

It's amazing how as a build progresses there are unexpected changes, especially upon the realisation that modern day tech from other countries is light years ahead of a 'japanese nostalgia build'. The car wouldn't be where it's at if it wasn't for the intervention of Piggaz & Mick_o, the most expensive BBQ I've ever had as the build went in the complete opposite direction.

09Wr7vj.jpg

rDucvgt.jpg

L8gwmWS.jpg

 

  • Like 1
  • 5 months later...

Progress on the S15 continues, just received these photos.

Remainder of work requires mounting the catch can and then it'll be 100% ready for fuel system, wiring & ECU.

The oil drain was next to impossible to fit and had to be machined on an angle with special fittings. The 6boost manifold sits it in a spot with NO ROOM. If I had my time again, I'd pay the extra and run a Hypertune manifold seriously.

Dual map sensor provisions welded on. Intake pipe fab complete & the air filter/catch can will be fully enclosed. A lot of work went into the power steering reservoir & -10AN catch can. The underside was rolled in two planes to the shape of the strut tower, & it also features a pretty complex internal baffle arrangement, a provision has been made to run push lock hose for when I need to drain the can.

4 port mac valve is all hooked up with teflon line goodness.

So in the meantime I'll refit the interior, front bumper & bonnet, & fit superclamps to the intercooler piping.

The next few months will be slog to restore my bank balance so I can spend on a TRP fuel system & Insight ECU package. After that, the likelihood of me spending money on cars, unless something is broken, is close to zero.

KDZzSiY.jpg

CUuPikM.jpg

zcuu7TR.jpg

MyYElAV.jpg

ILIve8E.jpg

IOeNI8o.jpg

On 7/16/2019 at 8:35 AM, ActionDan said:

Also, I am not looking forward to trying to get my engine and all the shit into my bay either, this is stressing me out looking at the clearances lol

 

 

Since the EFR plan came to fruition, over 140 man hours & counting.......

1 hour ago, BakemonoRicer said:

Dan if you haven’t bought your manifold already I think a hypertune manifold will give you more room for plumbing...

No I haven't yet, thanks for the heads up. Was yours 6boost? 

 

Yes 6boost. Not to mention the EGT on the first runner was installed at the wrong angle hitting the cylinder head, and that took them 3 months to fix rather than sending me a new manifold. The 6boost manifold I had for the 3071R...I just got a message from the bloke I sold it too that the wastegate flange cracked off completely. So I think a Hypertune item is a better path.

1 minute ago, BakemonoRicer said:

Yes 6boost. Not to mention the EGT on the first runner was installed at the wrong angle hitting the cylinder head, and that took them 3 months to fix rather than sending me a new manifold. The 6boost manifold I had for the 3071R...I just got a message from the bloke I sold it too that the wastegate flange cracked off completely. So I think a Hypertune item is a better path.

Appreciate the insite. 

I have heard mixed things about 6boost these days. 

  • 4 weeks later...

I present to you the EFR7670 Street Drag S15 SPL (formerly the Rising Sun S15 ?).

Very thankful to the mechanic/engine builder who got the car to this stage....the amount of thinking that went into this build was huge, and his work really is flawless with meticulous attention to detail. I can't imagine how much I would of been charged if the car was at any big name Sydney workshop. 

Remainder is interior/bodywork refit, the fuel system, battery relocation cabling, oil catch can push lock drain hose, wiring & ECU.

I'll need to somehow sort a custom cap for the radiator breather tank as the one from Sunline Racing doesn't seal properly.

The size of that turbo has WARP SPEED written all over it ? #TEAMEFR

nnRmtyG.jpg

tNP1tcp.png

 

 

7iRsL8Y.jpg

bYl6Tn4.png

  • Like 1
20 hours ago, ActionDan said:

What power are you expecting from this setup as I've been looking at turbos...

Whatever a reasonable limit is for a stock SR20 bottom end. Don’t forget the gearbox is made from glass so that’s a grenade waiting to explode.

All in it should do somewhere between 400 and 420 kw on E85, on a roller dyno.

9 minutes ago, Piggaz said:

Whatever a reasonable limit is for a stock SR20 bottom end. Don’t forget the gearbox is made from glass so that’s a grenade waiting to explode.

All in it should do somewhere between 400 and 420 kw on E85, on a roller dyno.

Fark, these things are pretty light to

Should be good for some mad skids

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
×
×
  • Create New...