Jump to content
SAU Community

Recommended Posts

Just a warning to the SAU Community from a private source. There is an R34 GT-R that's appeared online For Sale, with highly altered km's.

Car has 145,000kms on it when looking at a Japanese listing:

http://www.fcautosou...NE_GT-R%20VSPEC

Car now suddenly has 29,000kms on it:

http://www.allimport...d=4&car_id=2100

Different car you say? Well take a look at the old pictures that were up on the website for a while, but have been altered some time today.

post-709-0-60305300-1352356687_thumb.jpg

Guess it's lucky a screen dump was taken before things were changed to tell the true story :merli:

Looks like the wheels/front bar have been altered (if the adjusted pics are even of the actual car).

As the car has come from Auction - if you are enquiring - ask to see the Auction sheet, although it would likely be "unavailable" or some excuse about it not being purchased via Auctions etc.

Buyer beware people.

  • Like 2
Link to comment
https://www.sau.com.au/forums/topic/413303-beware-r34-gtr-for-sale-in-sydney/
Share on other sites

Good find. They seem to have a lot of R34 GTRs with similar kms ;) A lot of wear on the inside of the chair bolster too on the Japanese auction photos. Conveniently changed to black in AU.

Edited by sin-

Not surprising really considering who is selling this car.

Unless you can view an auction sheet you are probably safe to assume most imports will have had a "hair cut" these days.

Even then it there is a fair chance it has had one at home before it went to auction.

i rekon there two different cars (at least the photos are). The colour match is to good for the front bar.

The jap photos also have a nismo speedo unit, double din stereo and modified intake piping. The aussie has single din, factory speedo, different exhaust, different wheels, factory option flood lamps, stock front bar, stock airbox/stock piping, stock wheels.

i rekon there two different cars (at least the photos are). The colour match is to good for the front bar.

The jap photos also have a nismo speedo unit, double din stereo and modified intake piping. The aussie has single din, factory speedo, different exhaust, different wheels, factory option flood lamps, stock front bar, stock airbox/stock piping, stock wheels.

I reckon someones done a swap over on all the parts to their personal MNP GTR. I sure would with a lot of the gear on it.

The bar is quite hard to come by. The rest is easily changed.

So all the aftermarket gear has been taken off and replaced with stock - intake and intercooler piping were switched out, exhaust (originally was a Titanium one) as well.

With the speedo, the Nismo one would be prefered by the owner and the stock one would have 29000km.. which is more attractive to buyers.

I definitely think this is what happened.

Lol, seen this happen numerous times before.

This is why the value of imports in Australia are declining so rapidly...because a bunch of train wrecks always manage to trickle their way into the country through the dealerships (whose main aim is to profit).

Immaculate 1990s performance vehicles (think skyline gtr, supra, silvia etc) in Japan command an absolute premium...and command bugger all when they are in shit condition, which is why dealerships here can make a massive profit as theyll put a rather large markup on them.

I hope someone doesn't buy that particular vehicle, theyll get a few nice suprises later on down the track.

I reckon someones done a swap over on all the parts to their personal MNP GTR. I sure would with a lot of the gear on it.

The bar is quite hard to come by. The rest is easily changed.

So all the aftermarket gear has been taken off and replaced with stock - intake and intercooler piping were switched out, exhaust (originally was a Titanium one) as well.

With the speedo, the Nismo one would be prefered by the owner and the stock one would have 29000km.. which is more attractive to buyers.

I definitely think this is what happened.

+1

Someone else i know called earlier for a laugh. The car isn't even in the country yet, and it would have stock wheels when it arrived is what he was told.

So it sounds like the photo's are of an entirely different car to what will be coming in - because you can clearly see the screen shot of the site prior to editing was using identical pictures to the Auction. The photos are just to "make do" for now, as they've been caught red handed.

Someone else i know called earlier for a laugh. The car isn't even in the country yet, and it would have stock wheels when it arrived is what he was told.

My guess it the photo's are of an entirely different car to what will be coming in - because you can clearly see the screen shot of the site prior to editing was using identical pictures to the Auction.

Haha, my thoughts are invalid then.

Too early to say. Just keep an eye on MNP GTRs coming in to Australia, there won't be many.

Someone else i know called earlier for a laugh. The car isn't even in the country yet, and it would have stock wheels when it arrived is what he was told.

My guess it the photo's are of an entirely different car to what will be coming in - because you can clearly see the screen shot of the site prior to editing was using identical pictures to the Auction.

Hahaha yep.

Theyd be using pictures of another other car on their site in hope people dont realise which one theyve actually bought from Japan, as they would have realised soon after they put the actual pics up on the website that people might find out they bought a nice train wreck.

Anyway, a MNPIII in Japan is a rarity, and in immaculate condition they command roughly 85k + (iron chef will have a better idea of prices at auction, as i just scan a lot of the dealerships). So to be advertised at their dealership for 59k (with a nice juicy profit + shipping + compliance) etc....you guys can imagine the condition/price they picked it up for in Japan :laugh:

Not surprising really considering who is selling this car.

+1

You and I both know Tom, that this company has a 'reputation'. :mad:

A repaired black Nur was sold by them this year, to one unsuspecting buyer being a case in point. :mad:

ACA was investigating them about odo tampering :mad:

And there's more yuk...

Good find Ash! And thanks on behalf of NSW guys.

Thanks too go to other importers who've brought my attention to this.

I take note of the fact that the car is priced as $48,888 > geared to some unsuspecting Asian buyer?

It should be $4444

+1

You and I both know Tom, that this company has a 'reputation'. :mad:

A repaired black Nur was sold by them this year, to one unsuspecting buyer being a case in point. :mad:

ACA was investigating them about odo tampering :mad:

And there's more yuk...

Good find Ash! And thanks on behalf of NSW guys.

Terry I remember this NUR. It had gold rims on it (with chrome lips) and no interior pics were up on their website or carsales, and they were asking 75/80k for it from memory. I would love to hear what actually happened with this car. This all import crew sound like a bunch of tip rats.....Also, their asking price for this "stock" MP3 v-spec is way overinflated. Even if it was all genuine....

What I think happened with this car is that it came over as it appeared in the japanese pics, and when it was being complianced a whole bunch of stuff came off for the compliance so while they were at it they took the rest of the aftermarket goods off and swapped it all for stock to make the car appear unmolested. Secondly, any half-minded person who has been looking to buy a 34 GTR will know the main tell-tale signs of age/condition to look out for. Bolster wear is dfinitely at the top of the list. Clearly in this instance a simple interior swap has been performed however :I

Edited by Iron Mike

They have plenty advertised for sale atm to, which I'm sure they all have a similar story as this one.

When searching for mine I wasted a lot of time coming to Sydney from Newcastle to inspect cars, after 3-4 trips I'd had enough and never bothered again.

And I caught them using incorrect photos once before to, they advertised a vspecii with pics of a vsepc, when asked the question they admitted the photos posted weren't of the actually car?... Haha, so, I would say the same has happened here.

That black Nur Michael, had 146,***Kms on it in Japan > Just over 20,***Kms here in Oz.

The dude is using the same modus operandi

Yes as well as insisting on Japanese history and auction report, cursory giveaway signs are...

* bolster wear

* carpet wear

* steering wheel wear

* gear knob wear

* scratches under driver's door handle

* windscreen wiper arms ageing

* key scratches on ignition collar

* windscreen mouldings

* scratches on driver's door sill

* plugs should most likely be original on a 30,000Km car

* coil pack looms should be supple and not hard

* wear and tear on front bumper if original

* pedal rubber wear

...and that's before you inspect for rust or damage repair

What I think happened with this car is that it came over as it appeared in the japanese pics, and when it was being complianced a whole bunch of stuff came off for the compliance

The car isn't even in the country yet - so thats not possible :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I had 3 counts over the last couple of weeks once where i got stranded at a jdm paint yard booking in some work. 2nd time was moving the car into the drive way for the inspection and the 3rd was during the inspection for the co2 leak test. Fix: 1st, car off for a hour and half disconnected battery 10mins 4th try car started 2nd, 5th try started 3rd, countless time starting disconnected battery dude was under the hood listening to the starting sequence fuel pump ect.   
    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...