Jump to content
SAU Community

Recommended Posts

It's almost time... panels looks good. :D

Cheers. I am so happy with how the paint came out. Will get some pics someday that do it justice!

Im still waiting to see what the carbon intercooler surround looks like fitted up!!!

Only cause i want one haha.

Looking great mate!!

Thanks again, didn't end up using shroud man

Nuts! Looks so good! Where did you get the carbon exhaust guard mate?

Cheers mate. I got it off a member on here ages ago

Im at my desk furiously beating off to this.

Amazing

Hahaha :blush:

It's incredible to look at the underside of a car & think; "Crikey; those tyres sure are dirty!"

Amazing work, absolutely in awe of your patience & dedication. :worship:

Thank you Dale. She is definitely a labour of love and has given me plenty of grey hairs over the last 18 months! I just kept telling myself 'NEVER GIVE UP'. After all I have been dreaming of doing this since my first ride in a BNR32 over 10 years ago now!

The best ive ever seen,fantastic effort!

Cheers Matt. Wait until you see it in the flesh....

Still plenty of little things to finish off but she is getting very close. Finishing it off has been tough as I now spent most of my time doing this when I am in the shed

its-so-beautiful.jpg

ENJOY :thumbsup:

DSC_0334.jpg

DSC_0346.jpg

DSC_0365.jpg

DSC_0373.jpg

DSC_0366.jpg

DSC_0366.jpg

DSC_0369.jpg

DSC_0370.jpg

DSC_0371.jpg

DSC_0372.jpg

DSC_0375.jpg

DSC_0379.jpg

DSC_0387.jpg

DSC_0385.jpg

  • Like 2

Jess-arse cry-st!!!

Look superb mate!!

Can i ask where you got your full length carbon air deflector?

Also if you didnt use the intercooler shroud, do you know if it fits well? Cause if you dont wana use it, id be interested for sure.

  • 2 weeks later...

Hi Robbie, Gareth here....finally caught up with this thread.....have been rationing it for soooo long now not wanting to catch up and be able to view on demand........like i told you on the phone, sensational build, I have enjoyed it immensely, I know what people mean when they talk about not wanting to subject it to the aussie roads though, i just went for a 1500km mini-holiday in my 32 up in the victorian alps, some of the roads are in appalling condition, impossible to enjoy the drive when your too busy dodging pot holes and lumps in the road! If my car was in the mint condition yours is now in i would probably have cried on several occasions, as it's not i was only moderately cringing/pissed off when i couldn't dodge something...

can't wait to see it completed, not long to go...keep up the good work!

Hey man.

Can u give us some details on that toe hook u got on the front?

Is it a custom thing? Or kit? What's it bolt up too?

Any pics?

Looks like one of these:

http://www.rhdjapan.com/kansai-traction-tow-hook-nissan-skyline-gt-r-bnr32-bcnr33.html

Amazing work mate - looks sensational.

Quality of finish is better than factory!

Couple of queries....?

No dust boots on the dampers?

Did you consider powder coating instead of paint? Especially the larger items like sub frames and the like that a a major pita to take out to repaint when the inevitable stone chips occur. Powder coat - when prepared properly, would give a much more resilient finish.

Look forward to a similar level of OCD on the interior!

Looks superb Robbie..........just absolutely mint superb!

U have to be excited because I know I am :)

Thanks again mate. Yep getting excited to finally see everything come together and get see final result

I just had to change pants....

Classic haha

Me too. That looks amazing. I'm speechless.

Cheers mate, prepare yourself

Jess-arse cry-st!!!

Look superb mate!!

Can i ask where you got your full length carbon air deflector?

Also if you didnt use the intercooler shroud, do you know if it fits well? Cause if you dont wana use it, id be interested for sure.

Thanks again Damien. Yep, it's a Garage Defend item ex Japan. I wasn't happy with the finish on the shroud so didn't end up using it

I do still have it but

i just finish read through all 22 pages... all i can say is wow!!

absolutely amazing job mate, credit to you for sticking with it!

Now when do we get a vid of this baby purrring? :D

Cheers, always great to hear feedback. Def took some commitment but worth it in the end.

Will get some video up soon

Hi Robbie, Gareth here....finally caught up with this thread.....have been rationing it for soooo long now not wanting to catch up and be able to view on demand........like i told you on the phone, sensational build, I have enjoyed it immensely, I know what people mean when they talk about not wanting to subject it to the aussie roads though, i just went for a 1500km mini-holiday in my 32 up in the victorian alps, some of the roads are in appalling condition, impossible to enjoy the drive when your too busy dodging pot holes and lumps in the road! If my car was in the mint condition yours is now in i would probably have cried on several occasions, as it's not i was only moderately cringing/pissed off when i couldn't dodge something...

can't wait to see it completed, not long to go...keep up the good work!

Hey mate, really great to hear you have enjoyed. Yeah roads are junk in Aus, def going to have to watch for craters! And will only be out on dry roads

That's a decent trip in yours, I am hoping to get mine over to Canada one day and get some time in the Rockies!!!

needs bonnet struts, has ABSOLUTLY everythign else

get some propper shots taken of it while its this clean!

Not a fan of the bonnet struts, will do re photos!

very well done... looks professional, clean and neat. u should be proud of what u've done.. :woot:

Thanks heaps mate

Spot on

Amazing work mate - looks sensational.

Quality of finish is better than factory!

Couple of queries....?

No dust boots on the dampers?

Did you consider powder coating instead of paint? Especially the larger items like sub frames and the like that a a major pita to take out to repaint when the inevitable stone chips occur. Powder coat - when prepared properly, would give a much more resilient finish.

Look forward to a similar level of OCD on the interior!

Thanks Clive, I was going for that, she is my interpretation of the ultimate GT-R.

Good points, Bilstein didn't supply any boots...has anyone fitted some??

Powder coat never looked into but yeah good thinking. No idea what it would to do subframes....will wait and see how paint holds up

That looks so awesome mate! I hope i can see videos from the car in action? :-)

Best regards from germany!

Thanks again Kevin, will be a while before videos of her in action, you can't rush perfection haha

Bloody brilliant build mate, it's been a pleasure to read. Keep up the excellent work! :wub:

Great to hear thanks Abz, appreciate the feedback mate. Not long to go now, will do. Cheers

DSC00013.jpg

DSC00056.jpg

DSC00032.jpg

DSC00037.jpg

DSC00009.jpg

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Update 2: Today I'm f**king pissed. Some of you probably saw my thread that I opened shortly after joining this forum, "urgently need expert/experienced opinion", in which I discussed the possibility of a porous RB26 engine block which I also found hard to believe. Currently both turbos are out since the shitty braided line that was installed by whoever fitted the GT28 turbos leaked oil onto the exhaust. Today while working on the cam covers to put new gaskets and half moons in, I cleaned the side of the engine block with brake cleaner. Some time later I saw that it was still glistening with oil or coolant so I dried that off. But it was wet again shortly after. Verdict: I'm royally screwed. What you can see here (hopefully, despite shit resolution), circled in red, is a crack above the turbo oil feed. Extent is a few cm long and basically goes from #3 cylinder wall to #4 cylinder wall. It slowly lets coolant through, even without any pressure behind it. I am absolutely dumbfounded as to how this crack even formed, especially since it isn't along the cylinder as it usually is but rather a horizontal crack. Probably a few cm in length. Not sure on how to deal with this issue right now. Most likely, the only true fix is a new engine block, and even a relatively well done temporary fix requires at least a full engine teardown. Neither of those really fit my timetable right now, the car has been in my buddy's garage long enough as it is. I'm open to suggestions, but I'll be looking into ordering a new 05U block soon so I have one ready for the coming year, or whenever the current block inevitably fails fully. (Most likely once the crack reaches one of the frost plugs) I think it'd be a waste of money and time to rebuild the engine with this block. Oh and I found a rust hole on the side pocket of the trunk, which someone covered up with sealant goop, a piece of number plate and bodywork filler. Fun times. So far for every issue we fix we just find a new one that is arguably worse.
    • I have not found this no. I put one back on a couple days ago with no drama. I agree they are tight, but no need to remove anything. 
    • That is gates blue racing belt
    • Anyone found gates blue racing to be extremely tight/ almost impossible to install without moving the exhaust gear
    • Hello am apex am new here and also thanks for helping registering the forum 
×
×
  • Create New...