Jump to content
SAU Community

Recommended Posts

Took some pics the other day with the phone after a polish, came up pretty well.

Washed, clay bar using a Bowden's Kit, and poslished with a Mother's Wax Attack kit I bought last year, using Mother's Cleaner Wax.

Does any other sealant need to go on over the cleaner wax? It says that its the only step required, and it has left a nice layer of wax on it.

Looking to try some differant waxes in the near future, as this was done in a bit of a rush after work one night

post-493-0-93561200-1408589721_thumb.jpg

post-493-0-06459600-1408589769_thumb.jpg

post-493-0-24266900-1408589804_thumb.jpg

  • 2 weeks later...
  • 8 months later...

Did this on Saturday, the pics are MMS'd so a bit crappy in res. The paint was finished with Naviwax, after clay and one pass of polish. Didn't go crazy due to lack of time and just finished as we ran out of daylight

7166.jpg

7165.jpg

7169.jpg

  • Like 3
  • 10 months later...
  • 1 month later...
  • 2 weeks later...

got bored so i got the cleaning gear out again.

she reaalyy needed it but more so cos its starting to rain more and i want to keep it off the paint as much as possible so no heavy cutting but lots of wax.

did a full wash

claybar

basic hand polish

basic hand wax

DSC_0196_zpsvwbaairp.jpg

DSC_0203_zpsfjd5whmw.jpg

DSC_0202_zpsq711kall.jpg

DSC_0201_zps0r9psih4.jpg

everyone loves looking down a shiny bonnet :P

DSC_0198_zpslhrciuhs.jpg

and what does it do immediately???? rain

DSC_0205_zpsrmvnfqs1.jpg

  • Like 1
  • 1 month later...
  • 9 months later...

Did mine a couple of weeks ago. Steps were as follows . 

Used Bowdens Own wheely clean.

Washed with bowdens nano wash using two bucket method.

Claybar using mild nano wash solution for lubrication.

Bowdens paint cleanse and restore

Meguiars tech wax 2.0 applied with DA polisher

Waited 4 hours then used Bowdens fully slick .

Plus tyre shine . Pretty happy with the results

20170326_145228.jpg

20170326_145234.jpg

Edited by havoc_r33gtst
Added another image
  • Like 3
  • 2 months later...
  • 4 weeks later...
  • 3 months later...

Finally got around to removing the nasty yellow haze of the daily 35's headlights. No befores (just imagine all 35's that live outside 24/7) but fairly simple process:

1. Wet sand with 1500 grit paper

2. Polished with Meguiars Ultimate Compound and medium cut pad

3. Sealed with a Dupli-Color UV Resistant Clear Coat, otherwise they will just go back to being yellow in a few weeks

IQhzjr3.jpg

UT5rTd9.jpg

  • 6 months later...
  • 1 year later...
1 hour ago, Dandee said:

robert downey jr ok GIF
Had the guys from schmicko do it at my house, really nice end result. A bit pricey, but definitely cheaper than the in store detailing centres. If only I took a before photo! Oh and they also applied ceramic coating yeaaaaah!

detailing.JPG

Cost?

  • 1 month later...

It was $790, which is actually a good price now that I think about it, especially when dealerships charge $1-$2k for something like this and they use half-ass products. Oh and I paid about $300 for the exterior detail prior to this, so paint correction, machine buffed, clay barred and all that. Doesn't look as good here because of my poor quality camera, looks so much better in real life, not sure where else they do, but i think the ycover mainly most of Sydney, can go here mobile car detailing . I did think about doing this myself or asking a mate/car enthusiast, but just wanted the extra peace of mind; but hey no complaints haha

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...