Jump to content
SAU Community

Recommended Posts

I have an Apexi Power FC to suit R34 GTR, in excellent condition. No longer required due to upgrade but came out of running car. Does not come with handcontroller.

$690 inc postage to any Australian capital city.

Pics available on request.

Located in Brisbane.

Contact via PM or sms on 0402 421 437.

I have a used paiir of Garrett 2860-5 (Dash 5) turbos off my R32 GTR. These are in excellent condition and have only been on the car for a few months. No longer required as I am in the process of upgrading to a single turbo for more horsepowers.

Price is for the pair of turbos only, however I have stainless dump pipes and y-pipe available as well as a Greddy piping kit that are also going up for sale so if you are interested in these also I can work out a package price.

Price is $1900 for the pair. Located in Brisbane but can freight at buyers expense.

Pics will be posted shortly.

Contact via PM or sms on 0402 421 437.

For sale, VGC Hypertune intake manifold to suit RB26 whilst retaining the factory individual throttle bodies. This is to maintain throttle response yet even out the airflow to all six cylinders. Excellent finish on this product and it is sure to impress in any engine bay.

Location: Brisbane (Can post at buyers expense)

Condition: Excellent

Price: $1500

Contact: via PM or sms on 0402 421 437

post-107125-0-70698500-1360018599_thumb.jpg

I have a used 24U block, in excellent condition and ready to be used in any serious GTR application. It is well documented that these are stronger than the 05U block and in this case, much cheaper than buying a brand new one!

Comes with ARP main stud kit - also used.

Condition: used but VGC

Location: Brisbane

Price: $1700 ono

Contact: Via PM or sms on 0402 421 437

pics available on request (yes it looks like an RB26 block! ;P )

Full set of Tomei forged pistons for RB26 brand new in the box never been used. These are plus 20thou (86.5mm). Includes pistons, rings, pins and locks. To suit std stroke rb26. Cost $1700 brand new.

Condition: new -perfect

Price: $990 ono

Location : brisbane

Contact: PM or sms 0402 421 437

  • 2 weeks later...
  • 2 weeks later...

N1 Block Sold

Tomei Pistons Sold

Dash 5 Turbos still SOLD

STILL AVAILABLE ARE THE FOLLOWING 2nd hand parts:-

HKS 2530's for RB26 - low km's, perfect condition. $2500 ono

CES competition dump pipes, HPC coated (black), with 3" outlet. Also includes CES stainless Y-Pipe for twin 3" into 4" for the ultimate dump pipe setup for an RB26. Cost over $1600, have had dumps recoated so they look brand new! $1100 ono.

HKS Cat back exhaust suit R32 GTR - stainless steel $550

Trust 617z twin turbo kit for RB26 complete with std manifolds, no-name dump pipes and all lines $2900 ono

ORC twin plate clutch - push type Excellent condition $1900 ono

OS Giken twin plate clutch - push type VGC $1500ono

R33 GTR Gearbox - pull type $990 ono

Sard 700cc drop in injectors - RB26 (top feed) $440ono

Splitfire coilpacks - R33 S2 or R34 GTR (dis-005) $450

Trust 115mm Intercooler for GTR (32/33/34) $1100

Trust R32 GTR hard piping kit (lower pipes) $500

Vipec plug in ECU for R32/R33 GTR $1400 in case ready to go!!

R34 GTR Power FC - no controller $690 ono

Nismo engine mounts and gearbox mount - 2nd hand to suit RB26 $250 for the set

Nismo in tank fuel pump kit to suit R32 GTR $200

Nismo RB26 regulator $60

R34 GTR front seats (pair) $1500 - slight tear on drivers seat but easily fixed

R32 GTR seats - some material damage $300 for the pair

R33 Brembo brake callipers - front pair $800 ono (if you want brand new DBA4000 slotted rotors, add $500 for the pair)

RB26 Long Engine with intake manifold - genuine 80,000km, build date 09/94 with long nose crank. Painted blue covers, adjustable camgears, clear timing cover, still in car running and can provide compression test results. Never boosted over 18psi. Extremely tidy looking engine. Can come with PS pump, AC, alternator etc. Just no turbo side. $3500 ono

R32 GTR engine wiring loom, including injector loom and coilpack loom $450 ono

R32 GTR Alloy Bonnet - white VGC $600 ono

R32 GTR Headlights $400 pair ono

R32 GTR indicators $200 pair ono

R32 GTR alloy drivers side guard - white $200 ono

R32 GTR alloy boot lid - low spoiler, std holes filled $400 ono

R32 GTR fibreglass Trust front bar - white, some cracks $250 ono

R32 GTR doors - pair - blue - includes glass $600 ono

R32 GTR rear cradle, diff, axles, hand brake cables and half shafts $750 ono (rear brakes not included)

Location : brisbane
Contact: PM or sms 0402 421 437

  • 5 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...