Jump to content
SAU Community

Recommended Posts

No need for a pod mate, you will only go backwards. simply cut a few holes on the side of the airbox if you think the snorkel is restricting flow. I have seen nearly 500kw through a cotton panel element.

Braided hoses won't help much, they are only rated to 200 degrees anyway. Bring it around again sometime and we can try and run new rubber hoses over the top of the engine. Or when we do the oil cooler perhaps.

Moh, you are the bitch. :P

  • 2 weeks later...

Update:

Car issue all sorted

Ended up being a faulty CAS

22 psi down to 18 psi, conservative tune to make sure it is all ok.

Then will be coming back with 2-3 degrees more timing (~20rwkw) and up to 6 psi boost

Top line no airbox

2nd line airbox restriction

1622751_804351736245854_1333795786_n.jpg1622751_804351736245854_1333795786_n.jpg

1898920_804351736245854_1333795786_o.jpg

11915445-1136794226334935-80194056083257

  • Like 1

30kw gain from not having the airbox lid is interesting, shame we didn't run it up with the lid on and no filter though.

Yes will have to book my car again in the future to modify that airbox :/

holy shit mother f**ker yoda and shit.

you got the 350 you wanted on 98, and then add some for E85. (this is on E85 yeah?)

Yeah tune is on e85

Trent said its going to go over 400rwkw easily once we bump up the timing again and boost

But yeah don't need that much power! Happy with my airbox limited 350rwkw for now lol

Haven't even had a chance to boot it yet, wonder if I will have traction....

Interested about the airbox issue my tuner told me same of being held back some kws due to the airbox. But I've also seen people proving that there are no gains with pods.

Depends at what power level I spose

Im sure at 280rwkw difference would be neglible but once you get up in power it makes power harder to get rather than a brick wall restriction

  • 2 months later...
  • 3 weeks later...

Updates?

Sorry no real updates, have been overseas and taken a step back from working on the car

I think its time to stop spending money on cars lol

In saying that hit a rock in the middle of the freeway that split my lower lip.

So that will get fixed with the insurer along with fixing the whole front bumper, then when I get money a set of D9R's then i think im set :)

what body kit is that mate? looks crazy

Just a Ztune kit mate :)

I was following your thread really closely up until/before you got the kit (and it was still white haha)

Ermagersh you have come a long way man, absolutely balls to wall in terms of the build. Hoping to follow a similar path when I get off p's; in terms of the GTR kit.

PS
I looked up JDL they really don't ship to AUS :'(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...