Jump to content
SAU Community

Recommended Posts

Ah sorry boys sounded a bit dumb what I said there I was running penrite sin and switched to royal purple! Mate it's done alot for me car it's runs way smoother, revs better, comes on boost way faster, just changed the whole way the car is! U will know what I mean when and if u try it it runs MAD! Now

regardless of the OP's lack of explanation..royal purple produce great oils. Using them in my gearbox and diff's - performing great.

Although the one hate i do have with them, is the dark colour of the oil makes it hard to tell if the oil is getting contamintated by something.

Edited by wedge_r34gtr

the question i would put to you is how often do you change you oil if going from one oil to another made that much difference

I change the oil in yhe missus mazda every 10k as per schedule, went from penrite every day synthetic to motul 8100, felt better instantly.

felt crisper, slightly up on power.

I was actually surprised.

Ah sorry boys sounded a bit dumb what I said there I was running penrite sin and switched to royal purple! Mate it's done alot for me car it's runs way smoother, revs better, comes on boost way faster, just changed the whole way the car is! U will know what I mean when and if u try it it runs MAD! Now

Penrite Synthetic what?

All the things you have mentioned point to the fact you probably went to a less viscous oil. I could achieve similar by purchasing no name oil with a lower viscosity.

This guy smells like Sheene the infamous sau ganster rapper, that cuts like chuuudder. He has bumped all his fav threads, and has the same prose. Aka, Onefaster26, and Sheene Ellis, the starter of what turned into the red head thread. Also likes starting similar mind numbing threads.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...