Jump to content
SAU Community

Recommended Posts

A fire extinguisher is required by all entrants and needs to be bolted to the vehicle. Screws or cable ties are not acceptable.

While everyone is getting their cars ready this weekend keep this in mind. People have been good lately but since we have a few newbies this is worth highlighting. Please use bolts.

Another thing worth mentioning is check your engine oil!!! Last Deca we unfortunately had someone ruin their engine due to not having enough oil. Dont let this be you.

4 Hayley Stapley 180sx

5 Bec Pretty Mini

10 Karen Caruso Mini

11 Juliette Remfrey BRZ

30 Paul Stephenson 34GTR

31 Ekat Evo7

Wow! A new Record!!

6 girls have entered!

How do you feel about being beaten by a girl??

  • Like 1

Hey guys can I be changed to the 180sx.

Sorry for late notice but the car is ready and has been to the last 3 deca events with this club.

If I need to pm someone then let me know.

Oh no josh, i geuss this means the r33 isnt fixed :wacko:

Thrash day for the 180sx it is! lol

Guest
This topic is now closed to further replies.



  • Latest Posts

    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
×
×
  • Create New...