Jump to content
SAU Community

Recommended Posts

hey mate, just want to say yours is the only red skyline Ive actually liked...so well done.. i normally don't like red on cars period :)

im running a simmilar settup to what your looking at... 720cc injectors/z32/nistune/atr43ss2 and im making 265rwkw at 18 psi but have a top end restriction so once i sort that out il be seeing closer to 300
its a great turbo man... lose a little bit of response but it kicks you in the face when it hits... as for the intake pipe i would seriously consider getting that replaced with a metal one at anything over 220kw (from past experience)

cheers man. keep working hard..

gtt master race mate! +1 sub

  • Like 1

Timmy just asked him about it!!!! He said it should be sweet. Very excited. The old wallet is taking a beating.

My next problem:

Should I install my turbo and replace exhaust gaskets and drive up to central coast from western sydney?

or should I pay to have it fit in there..

There is a big price difference. Some people say its fine. Jez is advising against it.. I am unsure what to do

Yeah I wouldnt drive it untuned... or if you have too I wouldn't hit more then 3k rpm as well as not driving very far

Have a look around for cheap tow.. or maybe even see if someone on here has a car trailer you can flick some dosh their way.

Good luck either way mate itl be fun when its in!

  • Like 1

i put a hypergear highflow on mine many years ago and drove it to the tuner.. going to central coast though you're bound to put it on some load going uphill which might be a risk

tow would be silly expensive.. If it was me 2 yrs ago I would of risked it if it was a relatively standard setup and done something like leave the actuator off so it was a pig with no power, would use a full tank driving that far easily though

  • Like 1

Maybe I'm alone in having driven with my highflow fitted for around 6 months running on a 10psi actuator - the ECU seemed to handle it fine (I did disconnect the factory boost control).

If you had a bigger actuator / higher boost, that would definitely be a problem though.

  • Like 1

Joey!!!

I wish I could as they are right behind my house. But they seem pretty busy for the time being as I haven't heard back from my enquiries yet. I decided when I go the e85 route and get an ecu I'll do it with them for the final form

Hopefully jez will help me with my daily duties for now.

Man you gotta go in and see them, they deal with bulk time wasters so at times they may be too busy to reply or call back. If you see them face to face the they know your serious. Even after all this time I always going in and have a chat to the boys if I need stuff done :)

They should still be there when you finish work and if you can't get Yavuz make sure you get a hold of Mark

  • Like 1

Yeah that's probably why I think. That's fair enough. I've only heard good things. I have been there before a while back briefly. I don't know them personally though. I've already committed to jez. So we will see how it goes.

attachicon.gifImageUploadedBySAU Community1420776464.017106.jpg

Put a leather steering wheel cover. Turned out okay

My leather was all cracked and spliting on my standard wheel so I put a JDM S15 wheel in wiring harnes is the same as r34 so the airbag & horn plugs straight in :)

Edited by DoseVader

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Resizing injectors in Nistune can be done a couple of ways, and there are a couple of ways that you can make a mess of it. The tuner needs to be really aware of the effects of whichever approach he uses (either K, or TIM). They are both easy enough to "get the injector size right" to run the engine. But little details like old start enrichment and hot start are affected differently, depending on which boxes you check.
    • Pretty safe to say almost everyone that has tuned their own car has experienced this issue. The difference being that we have our laptop in the car and when it happens, it's literally 10 seconds of tuning to sort it.  Would you be happy to plug in your laptop and sort this yourself? It is a very simple process and there is no risk of harming your engine (if you are worried about that). 
    • Yeah thats the next step now, either they wil or i will take out for a drive to work and go straight their after work and see is we get the same issues 🤞  thought i try my luck here too, never know someone else might have had the same issue but thanks for the reply 
    • Basically your tuner needs to drive it for the 30 min (or whatever) to create the same conditions then check the ECU settings and sensors at that time. They may not be excited to because that takes them 30 min rather than just opening the bonnet and seeing the problem straight away.... Hot start is generally not as tricky as cold start, but there would be a table for fuel enrichment vs coolant temp as a starting point
    • Yeah, they all cant say anything for sure as everything is working fine . Said unable to find an issue untill it stops again. Could mist likely be CAS wiring or IAS valve issue but again not 100%
×
×
  • Create New...