Jump to content
SAU Community

Recommended Posts

  • 1 month later...
  • 2 months later...

Bit of an update, got the front flares to a point I am happy with.

A9X_0251_resize.thumb.JPG.e03aee5d060d2360abf67c23ec043c59.JPG

Started on the rear flares, cut the bottoms back off and started again.

A9X_0253_resize.thumb.JPG.9a59e8981bd89cf148db2663b817e8e7.JPG

A9X_0259_resize.thumb.JPG.5e000fac85c821cd8bfde92f999cd430.JPG

Wasn't happy with the bonnet hinges I made so decided to use VE commodore boot hinges, had to create a pocket each side for the hinges to sit in.

A9X_0267_resize.thumb.JPG.4b3abf7790dbe6e28f726cf889394985.JPG

A9X_0281_resize.thumb.JPG.746743453dfd45496b9374e11efcd6f2.JPG

A9X_0283_resize.thumb.JPG.cff386d58a40a871493c274c657770ea.JPG

A9X_0286_resize.thumb.JPG.edc5441996221a93aa6db36fcd17f78a.JPG

Also welded up some holes and seams in the engine bay.

A9X_0306_resize.thumb.JPG.b455434bcb4af76f560b0253b60eaf2f.JPG

  • Like 7
  • 4 months later...

The motor has been dropped off at JPC and the seats are at the trimmers.

Cut off the sill to repair the damage.

A9X_0325_resize.thumb.JPG.ca3d87542fceea8346a68e13dcf4fe31.JPG

A9X_0326_resize.thumb.JPG.fdcd881b7d495a75dfc15ae80758a638.JPGA9X_0331_resize.thumb.JPG.145c3361d04b751fe060db51d9f18382.JPGA9X_0337_resize.thumb.JPG.446a6f9ffd9ac0229637073ea219cbe1.JPG

Had the shell dipped at Recoat paint stripping and have now started spraying the epoxy/prime.

A9X_0367_resize.thumb.JPG.a535e0a84ba02957099127e10660315f.JPGA9X_0394_resize.thumb.JPG.768f75669ffb32abb382935ed32bb676.JPGA9X_0396_resize.thumb.JPG.a8b104121d4f9f16cb24f756fec06e07.JPG

  • Like 7

Yes had it dipped at Recoat paint stripping, they work out of their shed behind their house. I don't think Recoat smash repair are going anymore after the death of a worker the other year.

  • 2 months later...

Update time. Having the shell dipped has turned out to be more work than I thought.

About 14 holes have been drilled in the shell that they never told me they were going to do so these had to be welded up.

Yes that is a hole drilled in the middle of the roof skin.

A9X_0404_resize.thumb.JPG.9b7e2988ca8703c87820f90346779031.JPG

A9X_0406_resize.thumb.JPG.df706a64c431e5105d7d8dccea9ac7ba.JPG

 

 

I was surprised at the amount of rust that started to form under panels, I had tack welded the sill panel and two extra roof braces on to the shell and removed them when I got the shell home.

 

A9X_0412_resize.thumb.JPG.4ce36a6ad99ea190ef38aeccb440cbae.JPG

A9X_0386_resize.thumb.JPG.b819163ea0fb05c3659fa386187b9882.JPG

 

There are also spots where it looks like acid is still leaching out of the seams.

 

A9X_0399_resize.thumb.JPG.d734ffef3962fade3451ea325c3a0d36.JPGA9X_0400_resize.thumb.JPG.a6e553ccf8c207c9fa18260d84015fc2.JPG

I was also surprised at the amount of body deaden-er and seam sealer that was still in the shell.

The black shape in the middle of the photo is one of the many big of body deaden-er.   

A9X_0401_resize.thumb.JPG.5fd5ba38bf08e317bfffbd87aec3e197.JPG

 

 

I have had to strip and clean and sand every part of the shell so finally got the inside and underneath painted with KBS.

A9X_0414_resize.thumb.JPG.5f2e45ae27d74194a65bc986998d1266.JPG

One coat of silver KBS, still need to seam seal then a coat of black KBS.

A9X_0418_resize.thumb.JPG.42402dfb283097bf789906cb26fb84b2.JPG

A9X_0424_resize.thumb.JPG.540afbaf682c4b2c28581d612c982ab8.JPG

A9X_0425_resize.thumb.JPG.e4b85fad84755da736915a15158dc9a3.JPG

  • Like 4

Were the holes for drainage? breathing? 

And yes, poor form not to at least advise. Maybe they assumed you knew? First I've heard of it but I have never done this level of work to a shell. 

I've never thought of painting the inside of the body with KBS. My plan always only included doing the under body...but now you have me thinking....

Will this be the only form of sound deadening in the interior, or will you still be putting something like Dynamat under the carpet? Or, is this KBS just a sealer / rust killer paint rather than a sound deadening coating?

Edited by Tenny
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...