Jump to content
SAU Community

Recommended Posts

Unfortunately you can buy mobile network signal blockers online cheaply, so the thieves don't even have to be particularly sophisticated. :angry:

They're heaps good, but apparently really sophisticated thieves carry jammers with them that disable the GPS trackers, i've read it somewhere in these forums, and it makes sense. Doesn't hurt to have one hidden somewhere though

Edited by BuuBox

hey guys, a mate on mine found my car parked in Broadway shopping center on tuesday of last week, by complete coincidence.
i had a few people contact me that had seen this post and a few posts on facebook pages, they had witnessed an armed robbery that my car was used for.

i went to the carpark where my car was and called the cops, they towed it to an impound lot and investigated it, i then got it back last thursday.

it has some damage to the body and one wheel, but nothing to major, and mechanically it seems to be fine.

after talking to police i found out it had been used in several armed robberys around the city and was likely just dumped in the carpark.

i must be the luckyest guy out to ever even see this car again.
thanks for your concern and help, and it shows that putting it up all over the internet helped, i think social media did more in this case than police ever could have.

R32 GTR as a get away car?

They cant be that smart, the coppers will be chucking a u-turn every time they see it not because its stolen or has been used to knock off the servo but because its a Skyline.

Should of pinched a SS or something, lots of plates to steal and its common lol

Good to see you got it back though, a rarity these days

at the end of the day if they want it they will get it. but it didnt help that i had no alarm at all.

they would have thrashed it for sure, its a stolen gtr! but i am a mechanic and have sussed it out a fair bit, and seems to be running as normal, to tell you the truth i dont want to know the compressions, there isnt much you can do about it anyway, and my wallet isnt ready for a full rebuild at this stage.

Wow - very lucky. Glad to hear you got it back though.

I would also +1 - get it compression, leakdown tested and driven by some knowledgeable mechanics. Would be better to outlay a few $100s in tests to know the health of your car and how it's been mistreated.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...