Jump to content
SAU Community

Recommended Posts

Just to chime in..

The Car's KM's are definitely taken down when de-registered.

Every Customer's cert I have seen as a deregistration odo-check done ; a month before the Planned Date of Export on the Certificate.

Of course no one would ever dream of rewinding the odometer to match the kms at the last shaken, prior to dereg....

These certificates should not be relied upon as the bible, as essentially your buying a used vehicle from another country.

They should merely be a gauge to identify if there has been significant windback.

Of course, the critics would argue that I drove my GT-R and wound it back.

And there is nothing to say that might not be a case.

Remember, you are buying a Used Vehicle ; there is always a risk being taken in your purchase.

These certificates should not be relied upon as the bible, as essentially your buying a used vehicle from another country.

They should merely be a gauge to identify if there has been significant windback.

Of course, the critics would argue that I drove my GT-R and wound it back.

And there is nothing to say that might not be a case.

Remember, you are buying a Used Vehicle ; there is always a risk being taken in your purchase.

This is true ... until they use it as a selling tool. Buy this "Low" Km version of such car.

Yes definitely this is not the be all and end all when it comes to car inspection but it will add to the car.

I'd rather buy a 15 year old car with 200,000 on the odo than 100,000...

That said, ignore the mileage...get the engine tested and check the rest of the car for wear. Jap cars on the whole are quite reliable; if these things check out okay then they will usually last you a very long time.

  • Like 1

As an import broker, I completely agree with you mate. When looking at cars over 10 years old, the reading on the odometer is really the last thing I consider. However I can tell you that the vast majority of people we source cars for are hugely caught up on the kms showing on the dash. And even absolute dungers going through auction will fetch big dollars often purely on the basis of those kms.


My old white R34 GT-R was a perfect example. People turned their noses up at it because it had 112000kms on it. Yet it was one of the cleanest, straightest examples I've seen. Inside and out. The engine was strong and healthy, the gearbox was the tightest, nicest getrag I'd driven.

The problem is there are also punters who will turn a blind eye to it, even though they know the odometer has been hit.

Just as an aside, why aren't dealers compelled to list VINs in their ads in the same way private advertisers are?? I've only just noticed this.

As an import broker, I completely agree with you mate. When looking at cars over 10 years old, the reading on the odometer is really the last thing I consider. However I can tell you that the vast majority of people we source cars for are hugely caught up on the kms showing on the dash. And even absolute dungers going through auction will fetch big dollars often purely on the basis of those kms.

My old white R34 GT-R was a perfect example. People turned their noses up at it because it had 112000kms on it. Yet it was one of the cleanest, straightest examples I've seen. Inside and out. The engine was strong and healthy, the gearbox was the tightest, nicest getrag I'd driven.

This exactly! Hit the nail on the head for me. You can find much cleaner cars with more kms on them then others. It comes down to the individual car and how it is. Hence selling/buying a car based purely on the odo reading is not going to get you the best car for the money. And this point can definitely be seen within our community :)

"better sell my '69 911 with 54,000kms on odo before ppl suspect..."

I mean, does odo tampering happen with other brand cars? I presume so; but not to this extent?

  • 3 weeks later...

I work at Bespoke, (formally known as Import Factory, name changed due to Euro and local cars)

This was a mistake made by the salesman who put up the ad, as we have another one in Japan that is red also and only has 95000kms on it, he mixed it up. We offer ORIGIONAL Deregistration certs. and auction reports on all Imported Vehicles, so why would we do something like this. The mistake was fixed in minutes once we were notified!!

We offer a service to check your KMS, http://www.bespokeinc.com.au/index.php/tools/odometerhistory

why would we do this? And how could we fix this straight away if the speedo had been tampered with? (the ad was updated with a pic of the auction report and a pic of the dash displaying KMS)

Maybe it was a genuine mistake? Seems pretty stupid that a company would go to such extreme lengths to give themselves a good name and then do something like this. Either way well spotted.

This Is Our New car coming in soon. The Red Tommi Mak with 95,000kms.

1336auctionreport.jpg

This is the car which our other Red Evo was confused with.

Whenever we advertise a car we try to put VIN numbers because we have nothing to hide.

We guarantee our kilometers with all our imports unless they have been traded in by a customer.

We don't hold any consignment stock, so you'll never get an excuse "We didn't know, It wasn't out car"

All dealers claiming that the Japanese dealers / suppliers wind back kms are liars!

In my experience (since 1999) the Japanese don't like doing this and only do it when requested by Australian dealers.

As you can see on the report we purchase our vehicles from a reputable supplier who has been in the industry for more than 20 years. (Hiewa AUto)

They will not under any circumstances tamper with speedo's!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
×
×
  • Create New...