Jump to content
SAU Community

Recommended Posts

have just put my engine back into my r33 list of mods below. the problem i'm having it it has nearly no vacuum at idle when it idles at 1500rpm. then for no reason, the rpm will pick up and then idle at 2200rpm.

i have carried out a smoke test on the engine with no results. with the engine running, i have sprayed everywhere around anything that can potentially become a vacuum leak or cause one. e.g (injector seals, plumbing fittings under plenum, around the valve covers, the brake booster, the throttle body seal, the gasket faces) i have blocked of the hose to the brake booster to eliminate the booster, no change there. out of ideas, can anybody help me please. i have spent over $30k on this motor, i need to get it working, really getting frustrated. thanks

engine:

rb25det head full cnc with vg30 over sized valves 1.5mm

custom grind cams from surecams (297 in, 310 ex, 10.2mm lift)

hks adjustable cams gears

plazmaman plenum

plazmaman 75mm billet throttle body

40thou over JE customs pistons

perfect circle rings

brian crower rods

nitrided and heat treated crank

N1 oil pump

davies craig electric water pump and fan controller

hks 1000cc injectors on rb26 hks top feed rail

hks t04z 0.82 a/r rear housing

6boost high mount manifold

hks 50mm gt2 wastegate

plazmaman fmic

GZ motorsport vacuum pump with relief valve

fuel system:

bosch 040 intank

2L surge tank

2 x bosch 044 inline pumps

twin lines to fuel rail

aeromotive fuel reg.

Yeah have checked that also, all spot on. The inlet cam is advanced 3degrees and the exhaust I'd retarded 2.5 degrees. Even with the vacuum pump relief valve done up all the way to hard, it still only pulls -2 inhg, and changing it does nothing. Should see about 5-6 inhg at least without the vacuum is this more or less correct?

custom grind cams from surecams (297 in, 310 ex, 10.2mm lift)

This and did you degree them in or did you just bolt them in and think whatever the cam gears say is correct?

Big cam durations=little vacuum natuarally.

Degree wheels set on zero are rarely on true zero, skim the head, change the head gasket thickness and your degree wheels change position slightly, thats why people degree the cams in.

Even at its best, vacuum will be low with such massive duration cams.

Edited by GTRPSI

hi guys, thanks for the replies,

i gave all the specs of the engine to sure cams and the purpose of the car. (80% strip and 20% street). so he went off that bassis. he has done a set of cams like this before, and to his knowledge, there have been no problems. the head has also had solid rb26 tomei lifters installed too.

i have base timing of 15 deg. is it worth trying a little more?

as for dialing in the cams with degree wheel, i will have to ask my engine builder about that. i have used him for years and so have my mates, but some times shit happens i suppose. he also tunes it.

the ecu is haltech e11v2 milspec.

i've been told to expect hp figures around the 750 to 840 atw.

it has a 18psi stall converter and 1300hp powerglide behind it from MV automatics ins SA. used to have built jatco 3 spd from keas, but smashed that to bits with the old setup. that was making around 720hp flywheel

  • Like 1

i would be checking for leaks again. but use an air compressor this time. i was chasing issues and found 2 leaks after pushing over 10psi pressure into the engine. works a treat.

i would be checking for leaks again. but use an air compressor this time. i was chasing issues and found 2 leaks after pushing over 10psi pressure into the engine. works a treat.

thats a good idea, will try it tomorrow, i'll let you know how it goes either way

ok, smoked tested again and found 2 leaks. had to block the exhaust off to find them though, and still wait about 5 minf for that to fill up. the leaks were at the adjsutment screw on the fuel reg, and at the fitting going into the plenum for the brake booster. now has about 5 inhg at idle, idle around 1800-1900 atm, will do some tuning next week or so. need looser converter though. will post figures pics after tuning.

thanks for all the help guys.

We spoke to Camtech about our 26/30 also with a 80% strip/20% street setup and were recommended 280 duration 11.5mm lift cams for a easy walk in the park 600Kw at all 4 with a precision 7175.

RB30's also tend to absorb lumpy cams a lot better....

Will be interesting to see how user friendly you will find it on the street, post back with how it is to drive after you have tuned it.

Refer to my avatar.

I don't know what angle the tuner/engine builder are coming from with this combination of parts but hope it works out well for you - do the same as everyone else and you get the same results, sometimes its for the better... good luck with the rest of this, update when you've got the bugs ironed out as I am sure a number of us would be very interested to see how this come out :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...