Jump to content
SAU Community

Recommended Posts

This topic will carry on from a thread I posted elsewhere. My question is, why is the driving culture so bad? I live in Perth and driving here is a nightmare. People do not understand that the right lane is for overtaking, not for you to sit there and get in the way of people who are overtaking. When there is a speed camera ahead, people do not seem to understand that if you do the speed limit, it will not catch you, yet they insist on dropping to at least 20km/h below the limit for some alien reason. Also, the moment it starts to drizzle with a bit of rain; that's it. Brake lights everywhere you look. And God forbid there's a merging lane ahead, it becomes a car park. And this is not necessarily when it's rush hour, Perth drivers are so timid and lack the least bit of knowledge regarding road rules and common sense.

When you compare to other countries in Europe and Asia, you see how terrible drivers here are. I am not talking about driving in the city, but mainly on main roads and freeways.

The traffic police who should be regulating traffic and enforcing these simple rules which will make the traffic flow much better, do not do anything but collect revenue.

Is it the same elsewhere in Australia? What are your thoughts people?

Link to comment
https://www.sau.com.au/forums/topic/438198-australian-driving-culture/
Share on other sites

My thoughts...

You should tuck your skirt in and sprinkle some concrete on your cornflakes....

Ohhhhh cmon now, why you have to hurt my feelings like that? ahahahahaha

You obviously dont live in perth and probably never been out of Australia

We only teach one thing in this country. Speed kills, nothing else does. Any posted speed sign you must be at least 20 over or 20 under

Ok to have the biggest f**king shitbox known to man, anyone who cares for their car must be singled out and called a hoon

Egypt is insane! A 3 lane road with 4 or 5 lanes of traffic moving around on it, no indicators and horns blowing all over the place. The middle lanes could go either or both directions at once depending who has the biggest balls

Perth is particularly bad, especially when it rains. I grew up in the north of nz where it can rain for weeks on end, so I found it hard to understand everyone's difficulty but that's just Perth for you I guess. Also there is fark all decent roads to challenge people and bugger all hills which also don't help matters

What i hate most is trucks who hog up all the lanes so nobody can overtake them, why can't trucks just stick to one lane and not just stay in that one lane when they damn know too well that cars behind them can't pass them cause they go too slow.

Sydney trucks drivers get on my nerves especially at peak hours.

We've got it reasonably good here. Try Indian traffic.

According to a recent SMH article: "Indian roads are famously chaotic and among the most dangerous in the world. Around 140,000 people were killed in road accidents in 2012, which works out to 16 an hour.."

We've got it reasonably good here. Try Indian traffic.

According to a recent SMH article: "Indian roads are famously chaotic and among the most dangerous in the world. Around 140,000 people were killed in road accidents in 2012, which works out to 16 an hour.."

Thats insane. But at the end of the day, we are supposed to be living in a "developed" country so we shouldn't be using places like India & the Philippines as a basis for comparison. We should be comparing to Germany for instance and other European countries; and once we do, it will become apparent how undeveloped and 3rd world the driving is in Australia. It's sad really

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...