Jump to content
SAU Community

Recommended Posts

Its too effn loud that it gave me a headache coming back from the exhaust shop. A xforce cannon with a 3 inch internal diameter. He said it would be louder than my previous jansai one but i didnt think it was gonna be this loud! The r32 even has a cat convertor and another resonator before the cannon and its doing my head in! what a waste of money!! do not buy these cannons for your own sake and everybody elses

Agreed, the bigger the muffler body, the better the sound absorption. Should have gone for an oval Xforce or Varex at a minimum. Resonators do fark all from my experience, mid mufflers are required, and the 4 inch thick Magnaflow offset muffler fits in there nicely with plenty of clearance.

The Japs are pretty good with their exhaust design, and if you find the right system such as the Fujitsubo Jasma exhaust, it will flow well and possibly pass a noise test. You need to watch for restriction pipes in the rear muffler on some systems as it's cheaper than simply designing a good muffler.

I've heard of many an X-Force muffler developing irritating frequencies that become unbearable > even headaches.

I once put an oval one with twin tips on my BMW 328ci - bad move! The drone was worst at Motorway speed - 110km/hr

  • Like 1

You actually think there is any difference between an Xforce and Magnaflow muffler (or most other brands) internally Terry? No point blaming the brand imo, just the design and size.

An offset muffler is going to do a better job of dropping decibels than a straight through.

I like my twin tips,nice and quiet putting around town but when you open her up on the freeway a lovely angry roar. :-)

You too Huh? I took my Blitz Nur canon off and put a 3" Magnaflow Straight thru muffler with a twin tip on.

Love it. (too old for Canons)

Droneless but nasty at WOT. :woot:

  • Like 1

you think skyline cannons are noisy and drony?

i just bought a forrester turbo (cheap) and its got a cannon on it, sounds like a wet fart through a megaphone in an amphitheater. its a horrible noise.

needless to say as soon as the budget allows it'll be getting a far quieter system

  • Like 1

You too Huh? I took my Blitz Nur canon off and put a 3" Magnaflow Straight thru muffler with a twin tip on.

Love it. (too old for Canons)

Droneless but nasty at WOT. :woot:

It certainly is olly,had a custom exhaust and the three inch tips made ten years ago, sounds fantastic and looks factory. :-)

Also, if your car is a natro then yes it will be loud with a 3" cannon. In fact it will be loud with any 3" muffler. Go back to a smaller muffler (or complete system if you went 3" all the way) and it will be much quieter

Jap exhausts dangle too low its another reason for locally made, I have no probs with scraping over bumps and besides skylines come with twin tips from the factory, good enough for me to steer cleer of Milo tins. Never had a defect in my twelve years of skyline love. :-) :-) :-)

Pfft well woopty do its not all about brands but what it looks and sounds like, plus I happen to know a major police factor is a Milo can tip, have been told so by hwp at many rbt stations,I drive thirty thousand plus a year for work from qld to Tassie no defects,keep it sneaky is my motto. :-)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...