Jump to content
SAU Community

Recommended Posts

I was driving my track car last Friday and my engine all of sudden sounded like a wrx. I took all the spark plugs out to find one had cracked severely. I went down to supercheap and bought 6 new copper plugs (bcfr6es-11) and installed them.

It was hard to start and then once started a loud knocking noise was coming from the engine. So I turned the car off, checked fault codes for engine knock but none came up (5,5 on the ecu light).

I restarted the car and then unplugged each coilpack one at a time to see if the knocking stopped but the revs only decreased and so did the knock. I revved it up to 1500rpm and the knock got faster. Then after about 10 more seconds of idling the knocking stopped and the car stalled.

I then restarted the car again and it was struggling to stay on idle and sounded like it wanted to stall, and eventually it did.

I can post videos of the knock stopping and a video of after I restarted the car.

Please help. I have no idea where to start.

Spark plugs dont crack for no reason.

What is your tune like? I will guess and say something has gone wrong and engine has died.

The plugs cracking is an indication of Way too much heat (lean) so engine has pinged to death.

Do a comp test if you like. But the knock means it's dead anyway.

Mods are:

FMIC

Rb25 turbo

3 inch dump pump

Standard ECU

Compression test is:

Cylinder 1: 125psi

Cylinder 2: 121psi

Cylinder 3: 120psi

Cylinder 4: 125psi

Cylinder 5: 120psi

Cylinder 6: 126psi

Yeah but the car restarted after the knocking stopped. Also the car was running on 5 cylinders when putting it onto the trailer, and then immediately after the spark plug change there's a loud knock out of no where? I'm quite confused.

I just did another compression test. Cylinder 3 is giving different results.

Test 1 cylinder 3: 120psi

Test 2 cylinder 3: 80psi

Test 3 cylinder 3: 95psi

I'm assuming either what badgaz said, a stuck lifter or, a broken valve spring.

Valve spring would explain the knocking, missing and broad variance in compression results.

i'm pretty sure thats one of your lifters making a racket.... i fixed mine with pro-ma mbl8. i would try a good engine oil flush first, fill with some cheap thin oil...then run another flush...then fill with good oil mixing the l mbl8 with the last litre of oil.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...