Jump to content
SAU Community

Recommended Posts

Hi all,

Just wondering which wideband oxygen sensor to get. First thing is what are peoples thoughts on running an O2 gauge? I don't particularly want to but I spose it would be good to monitor AFR's. This car will be doing lots of drifting and I was hoping to just run oil temp, pressure and water temp.

Will be using an Adaptronic select plug in R34-GTT ECU.

Would ideally like to run something from the tech edge catalogue because they are Australian. All I really need is a sensor to feed wideband AFR's to the ECU.

Link to comment
https://www.sau.com.au/forums/topic/444361-wideband-o2-sensor/
Share on other sites

Having a gauge is a personal preference thing. Personally I look at it after doing any work in the engine bay but if you're hammering it around the track you won't so much as glance at it

edit: I'd have to agree with the MTX-L. I couldn't get the serial output working on my AEM EUGO but with a mates MTX-L it never had an issue. (same PC)

Edited by Blackkers

Email adaptronic for the gauge, there is one that can be wired into the ecu and give you real life reading on both the gauge and loges with the ECU. I've got that on my Kia, works very well and very handy when comes to road touch ups.

  On 13/06/2014 at 6:29 AM, hypergear said:

Email adaptronic for the gauge, there is one that can be wired into the ecu and give you real life reading on both the gauge and loges with the ECU. I've got that on my Kia, works very well and very handy when comes to road touch ups.

yeah that would be the Innovate MTX-L lol

http://www.adaptronic.com.au/product/mtx-l-wideband-airfuel-ratio-gauge/

If you're not really fussed about the gauge, how does the LC-1 compare against MTX-L? Have heard reports about it being "hard to wire up" but I'm not sure if that's a legitimate complaint. Some people shouldn't be let loose near a soldering iron :P

There is an LC-2 newly released but adaptronic not carrying it yet.

  On 14/06/2014 at 7:38 AM, eightsixboy said:

Not sure how accurate these are, i have mine installed pre cat and got the car dyno'd today and the readings were a fair way of.

Both or one of them might be due for a free air calibration?

I had a brand new AEM UEGO that was reading about .6-.8 more rich than at the tailpipe after comparing 2 other widebands.

The only difference is that the permanent sensor is installed pre-cat obviously. Not sure if that's normal

  On 14/06/2014 at 11:42 AM, 89CAL said:

Both or one of them might be due for a free air calibration?

Agreee with that. My LC1 seemed to read great. Had a 10% difference with the sensor used on a dyno.. trusted the dyno sensor and ended up maxxing out 555cc Nismo Injectors with not enough power to match.

Ditched the Dyno and operator when he was "going for the 300kw" regardless of the rich detonation, and took over 10% fuel out from 3500rpm and above on the road on the way home. Turned out the LC1 was spot on.

I just made sure i re calibrated it each Oil change. 3+ years now.

I got 4 years out of mine on ethanol, but it wasn't the sensor that went, it was the LC1 unit that failed.

It is carbon that buggers the sensors, especially if the heater can't keep up with cleaning it off. I know tuners that replace the sensor every week or two as they cop a hiding from running rich on petrol.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can ship Nismo floor mats to you: https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r33-bcnr33-stagea-wgnc34?_pos=1&_sid=9278c1467&_ss=r  
    • Here's the link: https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6642/misc/G49?frame_no=WGNC34-137122 What you think about it? The same product i found on nengun: https://www.nengun.com/oem/parts/40567/MiPwn5qAMfCfmpxHNDnwn5q9MDAx8J-QiW9sZC1qcC0xMTAtRzQ5LS0wMDE/Floor+Carpet+%2F+Mat+2/0688339eba149c19 Bot i have spoken to 😅 ensured me, that mats are 100% original, oem product. I have my doubts. I also heard what you mentioned, that nengun often offers items that are actual not available... On the other hand mats i found on japanese yahoo or ebay are in poor condition and still quite expensive so i'd rather wait for some better offers. My location - Poland. We literaly don't have ANY market for used Stagea parts so need to search outside Europe.
    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
×
×
  • Create New...