Jump to content
SAU Community

Recommended Posts

Hrms roads are damp tonight, 300kW feels like 90kW because the car doesn't move when the wheels turn LOL

put her in 3rd and smoke them hehe!! arrr de de de de!!! don't hit a pole though or you'll look like a loser with a tow truck in the morning lol Edited by AngryRB

a V8 is perfect for street :)

I've driven a few V8s and absolutely love the power/flat torque.. although the noise sounds abit shit.. (minus euro V8s, they somehow sound farking tits)

post-63726-0-07556500-1401681661.jpg

This is perfect for street!

(and you can even get grip in auto's 1st! - which is somewhere between 1st and 2nd)

FWIW, I wrote this car off due to driving entirely off boost, entirely off throttle, making about 3rwkw.

You can drive anything on the street.

It's the driver, not the car people.

Yes I'd like to know the Neo set up too .

I'm not sure if there is a perfect RB25 setup , an RB30 in a lesser state of tune ie same 260 odd RWKW must be real flat and almost V8 like .

Actually thinking about it Mr Mafia always reckoned his power delivery was almost V8 like and his R33 RB25 had a 0.63 GT3076R on it .

A .

After owning and driving many different cars id say every car has its pluses and minuses, i know the rwd skyline isnt the fastest, but its about what makes you happy.

Power level, whatever brings a smile to your face... And you can control the power with your left foot anyways.

Drive what makes you happy, im just under 300kw, would i like more sure, is my skyline a good daily, no. Its just my fun car, it can still scare me and thats what i like.

So 300kw on the street is fine, more would be fine in my fun car, but as a daily i would want easy driving in traffic and eaay to get in and out of, easy to park and not worried to park it anywhere.

Would i like a nice custom built 400kw daily sure, but being a bit meticulous id be always servicing it and worried about the depreciation of high ks...

For a daily get something easy and economical for your budget... Fun car can be any power level and any type of car...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
×
×
  • Create New...