Jump to content
SAU Community

Recommended Posts

Hrms roads are damp tonight, 300kW feels like 90kW because the car doesn't move when the wheels turn LOL

put her in 3rd and smoke them hehe!! arrr de de de de!!! don't hit a pole though or you'll look like a loser with a tow truck in the morning lol Edited by AngryRB

a V8 is perfect for street :)

I've driven a few V8s and absolutely love the power/flat torque.. although the noise sounds abit shit.. (minus euro V8s, they somehow sound farking tits)

post-63726-0-07556500-1401681661.jpg

This is perfect for street!

(and you can even get grip in auto's 1st! - which is somewhere between 1st and 2nd)

FWIW, I wrote this car off due to driving entirely off boost, entirely off throttle, making about 3rwkw.

You can drive anything on the street.

It's the driver, not the car people.

Yes I'd like to know the Neo set up too .

I'm not sure if there is a perfect RB25 setup , an RB30 in a lesser state of tune ie same 260 odd RWKW must be real flat and almost V8 like .

Actually thinking about it Mr Mafia always reckoned his power delivery was almost V8 like and his R33 RB25 had a 0.63 GT3076R on it .

A .

After owning and driving many different cars id say every car has its pluses and minuses, i know the rwd skyline isnt the fastest, but its about what makes you happy.

Power level, whatever brings a smile to your face... And you can control the power with your left foot anyways.

Drive what makes you happy, im just under 300kw, would i like more sure, is my skyline a good daily, no. Its just my fun car, it can still scare me and thats what i like.

So 300kw on the street is fine, more would be fine in my fun car, but as a daily i would want easy driving in traffic and eaay to get in and out of, easy to park and not worried to park it anywhere.

Would i like a nice custom built 400kw daily sure, but being a bit meticulous id be always servicing it and worried about the depreciation of high ks...

For a daily get something easy and economical for your budget... Fun car can be any power level and any type of car...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...