Jump to content
SAU Community

Recommended Posts

Hrms roads are damp tonight, 300kW feels like 90kW because the car doesn't move when the wheels turn LOL

put her in 3rd and smoke them hehe!! arrr de de de de!!! don't hit a pole though or you'll look like a loser with a tow truck in the morning lol Edited by AngryRB

a V8 is perfect for street :)

I've driven a few V8s and absolutely love the power/flat torque.. although the noise sounds abit shit.. (minus euro V8s, they somehow sound farking tits)

post-63726-0-07556500-1401681661.jpg

This is perfect for street!

(and you can even get grip in auto's 1st! - which is somewhere between 1st and 2nd)

FWIW, I wrote this car off due to driving entirely off boost, entirely off throttle, making about 3rwkw.

You can drive anything on the street.

It's the driver, not the car people.

Yes I'd like to know the Neo set up too .

I'm not sure if there is a perfect RB25 setup , an RB30 in a lesser state of tune ie same 260 odd RWKW must be real flat and almost V8 like .

Actually thinking about it Mr Mafia always reckoned his power delivery was almost V8 like and his R33 RB25 had a 0.63 GT3076R on it .

A .

After owning and driving many different cars id say every car has its pluses and minuses, i know the rwd skyline isnt the fastest, but its about what makes you happy.

Power level, whatever brings a smile to your face... And you can control the power with your left foot anyways.

Drive what makes you happy, im just under 300kw, would i like more sure, is my skyline a good daily, no. Its just my fun car, it can still scare me and thats what i like.

So 300kw on the street is fine, more would be fine in my fun car, but as a daily i would want easy driving in traffic and eaay to get in and out of, easy to park and not worried to park it anywhere.

Would i like a nice custom built 400kw daily sure, but being a bit meticulous id be always servicing it and worried about the depreciation of high ks...

For a daily get something easy and economical for your budget... Fun car can be any power level and any type of car...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
×
×
  • Create New...