Jump to content
SAU Community

Recommended Posts

I have done it from start to finish.

Don't. Don't. Don't. Don't. Don't, Don't.

Just sell and buy a turbo car. Seems like a hassle? Its far, far less hassle than going the alternate direction.

+1000.

Stuff conversions.

All I did was auto-to-manual my GTT, which is pretty darn simple compared to +T'ing a GT, and it was a total headache. I'm happy with it now but it's not worth the trouble.

Also, since these cars are worth peanuts these days, unless you have the tools, skills, time and space to do it yourself you're going to spend a big chunk of the value of your car on parts & labour to get stuff done properly. I know I have.

Edited by V28VX37

In all seriousness I am considering putting my wreck into a 4WD GT-Four, because that would be awesome.

In theory you could run a high comp N/A with turbo with E85. I would, if I could go back in time I would consider a higher CR but I'd never recommend it.

I'd say conversions are really only viable if it doesn't exist in any other way, like Hamish said, a LS1 in a R34.

But a Turbo GTT does exist, a manual GTT does exist.

Time is money, especially if it's someone else's time.

Time is money, especially if it's someone else's time.

That's how I feed my kids though Greg. Shutttup. :P

If it's as simple as slapping a stock manifold and turbo in there, and nistuning it on e85 I can't see the issue, costs would be fairly low and results would be great, till the auto slips. Haha.

That's how I feed my kids though Greg. Shutttup. :P

If it's as simple as slapping a stock manifold and turbo in there, and nistuning it on e85 I can't see the issue, costs would be fairly low and results would be great, till the auto slips into a wall. Haha.

Fyp

That's how I feed my kids though Greg. Shutttup. :P

If it's as simple as slapping a stock manifold and turbo in there, and nistuning it on e85 I can't see the issue, costs would be fairly low and results would be great, till the auto slips. Haha.

It's all fun and games until you can't run Nistune on R34 N/A's and you get an e-manage and then can't get it working and/or legal or RWC so you put a standard GTT engine in and then the wiring doesn't work right so you give up on Nistune because nothing talks to the auto correctly so you end up saying forget it use an e-manage then the engine blows up and you wait a year for a rebuild and then everything else explodes and scotty fixes it after 6 years of crap and then you slightly bend it

just buy a gtt

It's all fun and games until you can't run Nistune on R34 N/A's and you get an e-manage and then can't get it working and/or legal or RWC so you put a standard GTT engine in and then the wiring doesn't work right so you give up on Nistune because nothing talks to the auto correctly so you end up saying forget it use an e-manage then the engine blows up and you wait a year for a rebuild and then everything else explodes and scotty fixes it after 6 years of crap and then you slightly bend it

Because Ray. :P

FYP.

If only you had gone to Rajab...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
    • I have more than enough digging, laying blocks, moving gravel, airrating, feeding and top soiling the grass, and setting up the veggie gardens growing some seedlings,  and then removing all the unused rock to keep me busy for the next few months at least,  hopefully the rain stops soon so I can get a few hours in this arvo, but, before that Sunday is washing day, is every body happy, you bet your life we are Nice country road day drives are a day off whenever I'm muscle sore from all the landscaping at the moment, but, more epic multiple day drives will start once the majority of the big jobs outside are completed
×
×
  • Create New...