Jump to content
SAU Community

Recommended Posts

I think I read it was the side skirts of the kit.

Must have fallen outside of:

"Original under body floor between the axles is required, no flat bottoms, diffusers, etc may extend forward of the rear axle or aft of the front axle."

Team USA had wiring issues (i heard) and kept breaking ecu units.

I had a pretty good weekend, didn't get the mid 40 I wanted. Thats ok, something to aim for next year.

Good to put some faces to names.

  • Like 1

post-53650-0-95208400-1413781183_thumb.jpg

Sounds similar to my weekend.

Either popped or broke 3 driveshafts in 3 sessions.

Didn't finish a lap with 4wd, in fact I didn't make it past Corporate Hill with 4wd once!!

Was towed off 1 session when the above smashed itself to bits, made a hell of a noise when it let go.

Oh well, like Richo, there's always next year.....

Team USA had wiring issues (i heard) and kept breaking ecu units.

I had a pretty good weekend, didn't get the mid 40 I wanted. Thats ok, something to aim for next year.

Good to put some faces to names.

You did look good on the live stream hanging the arse out :)

was good to watch and on live stream I got to see heaps of the action

I'm hoping to have the 34 at a point I can enter it next year in clubsprint

http://www.youtube.com/watch?v=a_LbouJLjJA

This is the lap from the Superlap Shootout. Done the whole event on 1 set of Advan A050, Nothing left of the tyres pushing a 1750kg GTR around for 20 laps over the 2 days. Still managed to do a 1:40.4362 only .08 of a second of my best lap time for the event. Maximum attack on shagged tyres sliding around,

  • Like 2

attachicon.gifIMG_20141017_114958.jpg

Sounds similar to my weekend.

Either popped or broke 3 driveshafts in 3 sessions.

Didn't finish a lap with 4wd, in fact I didn't make it past Corporate Hill with 4wd once!!

Was towed off 1 session when the above smashed itself to bits, made a hell of a noise when it let go.

Oh well, like Richo, there's always next year.....

That's gonna be fun to clean up

http://www.youtube.com/watch?v=a_LbouJLjJA

This is the lap from the Superlap Shootout. Done the whole event on 1 set of Advan A050, Nothing left of the tyres pushing a 1750kg GTR around for 20 laps over the 2 days. Still managed to do a 1:40.4362 only .08 of a second of my best lap time for the event. Maximum attack on shagged tyres sliding around,

Nice work, man she looks heavy.

Is there any substantial weight saving being done on R35s yet?

When you look at Pro Class and see it being dominated by Evo's and Silvia's, you've gotta wonder if there's any way to really beat a light chassis without drag car levels of horsepower - which is useless on a control tyre anyway.

  • Like 1

This is the lap from the Superlap Shootout. Done the whole event on 1 set of Advan A050, Nothing left of the tyres pushing a 1750kg GTR around for 20 laps over the 2 days. Still managed to do a 1:40.4362 only .08 of a second of my best lap time for the event. Maximum attack on shagged tyres sliding around,

Woah! You sure we're manhandling it round the track haha, looks like a whole heap of fun though!

No weight saving in my R35 has full trim just took the baby seats out for Time Attack. This is the main problem with R35's the tyres go like jelly due to the weight. There is no way i can do more than 1 lap on the soft A050 tyres.

Hey guys, congrats to all the SAU'ers that did so well. Truely impressive!

Here is a compilation video I did from Saturday's highlights. Wish I could have been in 4 places at once to catch all the action.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...