Jump to content
SAU Community

Recommended Posts

Building this thing from a rolling shell into a dedicated drag car build.

- 3.4L Spool stroker kit with drag I-beams

- TH400 3-speed auto

- Mickey Thompson ET Pro Radial tyres (275/60/15)

- Goal is 7.xx seconds @ 175-ish.

2v2gz20.jpg

121siac.jpg

Link to comment
https://www.sau.com.au/forums/topic/448268-275-radial-r33-drag-build/
Share on other sites

Holy Shit, that car reminds me of buster!

Funny that! :)

Bought valves, springs, locks, retainers, guides and seals today. Got a great deal from Fabre on the lot and it was all in stock.

Head being disassembled tomorrow and the block arrives tomorrow to begin prep too.

tLRMxvj.jpg

Edited by 2rismo

Very cool.

Do you have an approx completion date?

ASAP. I've dragged my feet with other pursuits in the time I've had it. It's all systems go now. I'd like to race at Sydney Jambo in March with testing prior.

Precision Gen-2 8891 and 66mm gate:

Bl5DvPK.jpg

Enough assembly lube for 8 RBs:

dXarJrT.jpg

Dirty, dirty diesel:

LbzKwrb.jpg

This is unnaturally attractive:

vzxogbp.jpg

Almost all of this is staying out. Anyone need any airbag stuff?

xAgzgIx.jpg

All caged up:

Cag2Go0.jpg

Lots left to do:

HfIXOSl.jpg

  • Like 1

 

I'm curious to see the machine work required to fit the RB head.

Any reason you are going the TH400 over a lighter option?

Will be sweet to see this car ripping huge skids again

 

I'll have photos of the entire process of adapting the head to the diesel block. Will also be machining up and fitting plugs for the head so there is no water near the deck at all. The block will also be filled to the deck.

TH400 was chosen because the power I expect this to make will be more than what my prefered trans will take (C4). The aftermarket support for TH400 is now so strong that they can be made unbreakable at this power level and application. They're just such a known quantity.

The street car ran 10s pretty easy and needed a cage, GTR rear end, different suspension etc. It has since had 30psi jammed into it and it made 415kW. It will run 9s soon.

This car was offered to me as a roller with everything already done. As hard as it was to sell the red car, I have a history with this car too so it was an easy decision.

Kyle from 6Boost is making the exhaust manifold for this engine. Will fit a 5in dump without cutting up the bay and include the 6 x EGT bosses. Stoked.

Going for his 'pro-mod' manifold?

This should be amazing!

Out of curiosity what sort of rpm are you thinking of turning it to? I'm keen to know what sort of piston speeds people think are possible, especially with a 94mm stroke.

We currently turn ours to 8000rpm in our circuit car and that works out about 25m/s which is getting up there. Your engine being for drag purposes I suspect you are intending to turn it a little harder??

Edited by r33_racer

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • If you take the top half of the intake off you can unbolt the flap off the shaft and leave the shaft in there blocking the hole. Then you can remove the little vacuum canister off from under the manifold and get a spare vacuum line to run to the ECU. I can take some photos of it later. Probably best to get the vacuum source to the ECU sorted first though. Mine all worked mint with the base map from the GTT an I've pretty much let the closed loop sort the fueling and took 1 degree out of the whole timing map.
    • This IS something you also have to configure in Haltech (or at least I did in the past when going from onboard-to-ECU map sensor and an external MAP sensor in haltech land).
    • I'm hoping it's something as simple as the ECU is looking for an external MAP sensor, but he is trying to use the onboard MAP sensor.
    • You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
×
×
  • Create New...