Jump to content
SAU Community

Recommended Posts

A whole block of them from SAU will look superb > draw a crowd > probably elicit discussions over mods with bonnets up too...

Terry-32_zpseda1fb98.jpg

They won't be just 'pretty'.

Maybe a few enquirers will take away Membership Application Forms like 2013.

  • Like 1

I'm tempted to enter the LOLvo, but it still has that big ugly scratch in the bonnet and I can't be bothered having it repainted and/or covered. Otherwise the car is reasonably presentable - far from perfect, but not horrible either.

  • Like 1

Hmm, their Facebook page states the following for approval dates:

FIRST ROUND APPROVALS: Monday 15th September
SECOND ROUND APPROVALS: Tuesday 30th September
FINAL ROUND APPROVALS: Monday 13th October

So you might hear something today; or otherwise you'll have to wait until the 13th to get final word.

The Nur will get in, the rest of us wont because we're not part of the stance crowd or showroom condition.

Remember its not what you have its who you know, least thats the impression ive been getting over the past 12 months

Can we throw up some pics of the cars that have been accepted / approved then? Also helps so that we can recognise the cars as SAU on the day :)

6343959900_360fc11881_b.jpg

Eric (Pezhead)'s R33 GT-R:

9645575520_2522a83ab6_b.jpg

Dave (Aggroman)'s R34 GT-t:

5491547674_04fa5fe0cb_b.jpg




  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...