Jump to content
SAU Community

Recommended Posts

im not sure the wiring is much different to the power fc than the haltech, but again im not a tuner nor did i install it so i would only be guessing.

the io expander makes you have more configurations you can use with the Haltech. again im not a tuner but to me that sounds like a good idea.. im only guessing its for making different tunes and being able to save up to 12.. someone correct me if im wrong.

im with you jamie, i never got this "random cough" thing either. but i can say the car drives alot smoother with the haltech.

As for random coughing on power fc, I reckon it's a GTR thing.

4 of GTR's I have/had they all did that. My wrx which also have power fc, it doesn't cough nor my mates wrx.

I'm in 2 minds whether to bin the fc in the R for some map based ecu.

Probably questions suited to another thread but does one get cough while running with Nismo afm?

/hijack

If your car has a cough you will know about it. Ground wires helped, I might get 1 every 2-4 tanks where before I would get a few every tank. I have a dejetro

If you have a later model car, you probably have better earths and less dry solders which seems to be the culprit

Unless you have driven on a higher/high end ecu you you will NEVER understand! Dont get me wrong a power fc will serve its purpose but its the lil things a dyno doesn't Show you but it all happens under the right foot.

#closethreadbuymapbasedecu!

Edited by Mick_o
  • Like 1

At least a pfc still reads timing like it should. Other ecus have intermittent issues with the 360-6 cas. That's why people should have funds for a crank trigger just in case.

6C859AB6-5CA1-436B-AA65-873DBAD76007_zps

Without crank trigger

31EDDFD0-69B7-4BD8-8267-31B5B0438C21_zps

With crank trigger.

I can't remember now if the without crank trigger was done on the FC or the Link G4, it's been a few years since I put that on. Either way, that timing variation with the timing taken from the CAS is woeful at best.

Both graphs taken from my own car.

Good thread, subscribed.

I am currently using a PFC with 480hp (soon to be 550hp). Considering the swap to the Haltech.

A map sensor would be nice, due to the need for AFM's I am constantly battling "PFC disease"/ airflow reversion though the AFM's.

what good timing, im considering the exact same move, got Adam@JEM to quote on Haltech supply / tune and perhaps booking in next week

wanting fatter midrange, and e85 for anti-det, im running hks gt-ss, 720cc sard, nismo afm, nismo fuel pump @ 320kw

oil pressure drop protection is also appealing, im already running wideband, so would be good to feed that into ecu as well now

few Q's:
i run blitz dsbc boost controller, do i need external haltech 3bar solenoid or existing can be re-used without -ve impact?

map vs maf, is there a noticeable difference to throttle response if i switch the map?

anyone running nismo fuel pump on e85 or walbro e85 fuel pump a necessity?

I don't know what my point was.

Maybe it is just saying map is better than maf or vice versa isn't enough.

A shit ecu is a shut ecu regardless of what it uses to measure load. There's a reason factory cars use afms, even now (r35 gtr etc)

Popping cooler hoses shouldn't really be a deciding factor in choosing an ecu.

Popping inlet manifolds that's where it's at.

Back in the day I had a wolf 3d v4 on a vl turbo (map sensor, so it was good???)

Running extra injectors pre plenum (old days ghetto as, no cheap injectors like you spoilt kids)

Backfire, exploded plenum, ruined bonnet.

Due to having a map sensor car accelerates flat out atmo style (not concerning)

I simply set rev limit to 3000 rpm and drive car home like a boss.

Do that with an afm. Yeah, explode shit and keep driving.

Popping hoses is soft.

Edited by Ben C34

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Congrats on the career change!  I did something similar at the start of the year too, left IT / corporate after nearly 2 decades. Soooo when's the motor coming out for the spark plug change?
    • Hi guys, long time no post as per usual! It's been a busy year so far, the biggest thing being a new job.  After 28 years in the automotive industry I decided it was time for a change.  I was losing faith in the industry and where it's heading.  Now in a completely different industry (electrical) working for a company that manufacture water pump contollers.  Not as sexy as cars but it's an interesting,  challenging industry. I now don't work Saturdays which is a bonus!  It's still 50-55 hours a week but having Saturdays ack after 28 years of working them is awesome!   No news on the GT-R but i did decide to add some more JDM goodness into my life....           1990 300 ZX.  She's not perfect but for a 35 year old car she ain't bad!  Just going to tidy it up a bit and enjoy it.  It's currently auto but will start stockpiling everything for a manual swap. It WILL distract me even further from the GT-R but im hoping not for too long! It somewhat proves a 6'8" freak can fit in a 300 ZX.  Sort of...  I drove it home from the previous owners house in Melbourne via Black Spur and Merton Gap (2 awesome bits of Victorian twisty road) and it was amazing!  Handles so well!!!   I don't think it would be worthy of a full build page but I'll post up some of the upgrades here if anyone is interested?  Cheers guys!
    • End game is to: - Remove all the slop from old worn parts - Adjust setup so that the wheels actually fit and the car is drivable (currently it is not because of the extreme rubbing on the guards).   Progress over the last couple of days, removed the rear hubs! Next steps: - Buy bushings - Replace bushings/bearings on hub - Reinstall
    • Cracked deck  And other cam snap stuff   
×
×
  • Create New...