Jump to content
SAU Community

Recommended Posts

Neil my fabricator did the conversion for me he spent quite sometime looking for the correct bits from the wrecking yard ect. The pic and the info i posted gives you a starting point for the bits to look for but if you wanted him to do a conversion for you just need to send him the GTR parts and he will send you back the bits fabricated ready for install. Last person that asked he said $400. Sorry i couldn't be more help. If you want his details let me know. cheers

  • 2 weeks later...

Engines in progressing slowly but surely.

post-20010-0-62134900-1432285683_thumb.jpg

post-20010-0-45130700-1432285775_thumb.jpg

Completed wheel with terminated bulk head connector.

post-20010-0-95973300-1432285799_thumb.jpg

Speedflow bill this week :spank:

To avoid any problems associated with ethanol sitting in the fuel system for long periods we rigged up a fuel drain. The process will be drain the main tank add 98octane unleaded then connect into this quick disconnect fitting, rotate tap into off position which blocks return line feeding the tank then crank engine to purge remaining fuel in the lines and rail nice and easy.

post-20010-0-99934000-1432285907_thumb.jpg

Fingers crossed some bigger updates coming next week.

  • Like 2

What coils are you using ?

I'm looking at an upgrade at the moment and will most likely just go the LS2 route, I just noticed you have gone something else

Mick I'm running Honda Cbr bike coils with a CDI module powering them. Since buying the equipment i've heard some mixed opinions on the reliability of these coils so ill play it and see how they go. Being a complete OEM system with built in ignitors i think the LS2 route would be a pretty good option.

  • 4 months later...
  • 1 month later...

updates?

Yep updates coming finally got some spare time on my hands to start getting it ready for tuning... January is the target real keen to get it out for some roll racing at willowbank... Hopefully the smaller brakes to suit the 15" rims pull it up going into turn 1 >_<

Yep updates coming finally got some spare time on my hands to start getting it ready for tuning... January is the target real keen to get it out for some roll racing at willowbank... Hopefully the smaller brakes to suit the 15" rims pull it up going into turn 1 >_<

Just pull the 'chute... ;)

Found some second hand SSR's rims which we refurbished after making them fit. Took plenty of messing around though had to push the rim further into the guard by spacing the rim inwards by the way of 14" x 8mm ring that bolts between wheel center and rim. The 275/60 is 28" tall so placement needed to be spot on.

Just back from powdered coating today should look ok. :wub:

SP1's 15"x 9"

post-20010-0-26748800-1448542613_thumb.jpg

post-20010-0-03801700-1448543620_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...