Jump to content
SAU Community

Recommended Posts

I like tuners who tune without afrs or you know winging it

We will be in real time, I have the Haltech program on my laptop, it will be plugged into the ECU and he has the tune in his system. He will be utilizing Teamview and work directly from my ECU and his computer with all of the information he has at hand, hope it works OK ?

Did OK before when we worked on the old ECU, got me to Sydney OK

He wanted $$ for his time I told him to get fckd especially when we took the motor apart and saw evidence of massive detonation.

The motor had been dyno'd numerous times before and had always made very good power. In fact I did a comp test a few weeks before the tune and it was pretty much perfect.

Id tell everyone in Melbourne where not to go :)

He wanted $$ for his time I told him to get fckd especially when we took the motor apart and saw evidence of massive detonation.

The motor had been dyno'd numerous times before and had always made very good power. In fact I did a comp test a few weeks before the tune and it was pretty much perfect.

Id tell everyone in Melbourne where not to go :)

blew your motor up and stuck his hand out for $$$$$$$$$s SHIT!

  • Like 1

We will be in real time, I have the Haltech program on my laptop, it will be plugged into the ECU and he has the tune in his system. He will be utilizing Teamview and work directly from my ECU and his computer with all of the information he has at hand, hope it works OK ?

Did OK before when we worked on the old ECU, got me to Sydney OK

Glad you are cool with that.

Sounds crazy to me. Not knowing what the car is a actually doing or what the Afr's are is risky business.

Perhaps they know the tune is crazy rich, so they will back it off to just heaps rich.....

Glad you are cool with that.

Sounds crazy to me. Not knowing what the car is a actually doing or what the Afr's are is risky business.

Perhaps they know the tune is crazy rich, so they will back it off to just heaps rich.....

Maybe I am not worried because I know shit all about it and figure if he stuffs it he fixes it :)

He will have the results of the used plugs to look at, that may give him an idea if one pot is worse than another.

The car will be running and he can see the ECU the same as if it was on the Dyno, well except it wont be in gear with load, but it can be revved .

Can they check coils on an ECU ?

It is going back for a re-tune and the other problems rectified. ASAP !.

Still not sorted?

Take it back to them ASAP. Just incase something actually goes wrong and the engine does go pop.

Yeah, still going but just having a quick look at what is happening with the tune and will get it in and sorted ASAP :/

Maybe have a bit of a read about Tuning and see for yourself. And sure if he's a good bloke he will foot the bill for blowing your motor up.

haha, your a skeptic mate :)

I could read up on tuning and still know nothing, sometimes, ignorance is bliss

I am in a situation where I have had a build and there are a few things to be sorted, the builder has offered to do this, so until this is done and as much as it is a pain in the arse I have no choice but to see what happens..

These blokes have made some pretty good builds and should know what they are doing, when humans have a hand in things there is always the chance of a stuff up :(

People make mistakes, no worries. But not admitting to them or fixing the mistakes is the problem.

Now you hit the nail on the head, my car should never have left the shop from the start, over 5 months waiting another week would have made no difference. What was on their mind to give me the car like that, I am farked if I know ?????????

People saying the warranty doesn't count for anything don't understand how Australian consumer law works.

CRD have a good rep for a reason. As said above mistakes happen. It's how the shop handles it.

If any damage has been cause or anything needs doing, expect it to be free of charge.

It's alright Peter, honestly shit happening is a heap more common than you would think. Just be patient and it will all get sorted. ;)

Just remember to keep CRD on your side. Pissing them off won't get you anywhere.

And trust me when i say i understand how you feel!

  • Like 1

Yeah really good point - keep them onside by not going off your rocker but keep been a squeaky door so they don't forgot about it.

I am in NZ and I have heard CRD do some good work/builds. Would expect it to be sort and running mint. I think you should get more power out of 98 than you did and a $1600 tune seems a lot and not sure why it all wasnt done before it left the shot (E85 etc).

People saying the warranty doesn't count for anything don't understand how Australian consumer law works.

CRD have a good rep for a reason. As said above mistakes happen. It's how the shop handles it.

If any damage has been cause or anything needs doing, expect it to be free of charge.

It's alright Peter, honestly shit happening is a heap more common than you would think. Just be patient and it will all get sorted. ;)

Just remember to keep CRD on your side. Pissing them off won't get you anywhere.

And trust me when i say i understand how you feel!

As Above

I am not worried about it, I know they will do the right thing. I also know what I am entitled to expect as a consumer. As I said, they asked me to bring the car in. The touch up we will do is basically to give them a look at the plugs and a chance to go into the ECU and look see if they can touch it up a bit before I take it in..

I am sure if you have read my posts I may sound frustrated but I do not dump on their work as they have done other jobs for me and I have been very pleased with it.

I dumped on the communication at times, I dumped on the time it was taking at times but until now I have not had cause to crap on their skills as mechanics. I cannot help what other people say. I do not think I have mentioned their name, but you blokes know when it all started :/

I know they read these threads and there is not much I have said on SAU that I have not said to them. As blokes they are always pleasant and easy enough to get along with, but the most frustrating company I have ever dealt with. I am lead to believe that many build shops can be a little similar but that does not help when it is your first real go at a build :)

Just want it sorted and be able to enjoy their work

I am sure they will be happy to see the last of my whinging arse :)

Yeah really good point - keep them onside by not going off your rocker but keep been a squeaky door so they don't forgot about it.

I am in NZ and I have heard CRD do some good work/builds. Would expect it to be sort and running mint. I think you should get more power out of 98 than you did and a $1600 tune seems a lot and not sure why it all wasnt done before it left the shot (E85 etc).

Hi Mat, I would have thought that $1600 would have covered a full 98/E85 flex tune , but it is my first build and have no idea what they cost and I guess it varies from shop to shop?

:unsure:

They have had 2 goes at it and it is still has a problem but they need more time to be able to go over it properly for the other problems as well as the tune .

Just dropped the car off to change the plugs and Rego, so I will be able to give them the info they want and then we can move on and sort it out ASAP :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...