R32 Gtr Long Term Love, Now Project

[Piggaz]

4 minutes ago, r32-25t said:

I notice the nismo kit comes with gearoil but I always thought the getrag used atf?

It does.

[Sinista32]

https://www.motul.com/us/en-US/products/nismo-competition-oil-2189e-75w140

[Count Grantleyish]

Gearbox arrived [emoji16][emoji16][mention=13169]Count Grantleyish[/mention] you were right grant [emoji106] 

[r32-25t]

You win a tooheys extra dry next time you’re in town ?

[Count Grantleyish]

Ha!

I'll take it.

[r32-25t]

Yesterday I got a call because my suspension parts had arrived so I have entire whiteline catalogue for the rear and the front and rear sway bar kit also from whiteline 

[r32-25t]

And then I got a call from the other shop this morning and my diff was ready to pick up, I went down grabbed it and now it’s waiting till I do all the bushes and put it in

[WantGTR]

This is what progress is. Well done lol

[r32-25t]

The rear main seal was leaking so I replaced it with a genuine oneToday I got the clutch fitted and the release bearing was a little noisey and I replaced it, I also replaced the spigot bush while I was in there 

[r32-25t]

Father in law just happened to drop in so I managed to get the box inI’ve got everything bolted in except the rear tail shaft because of the rear end still being out of it, I haven’t fitted the gearstick yet and I still need to bleed the atessa 

[r32-25t]

It’s stock sir ?

[Sinista32]

That looks great

[r32-25t]

Thanks mate, my goal is to try and make everything look like Nissan did it, especially in the cabin and the outside 

[Robzilla32]

The spare screws in the console tray also make it look stock. Well at least it looks like the GT-Rs that I have owned...

[r32-25t]

They are screws for another project I’m doing in the cabin a

[Sinista32]

When you put in the 6sp Getrag did you have any issues putting the small dent in the tunnel to fit?

Did you take a picture of the location by any chance?

Edited March 21, 2018 by Anonymouse
Added a question

[r32-25t]

I saw the photos on rhd that nismo supplies and copied it, I think the rear would have cleared without it but would have been impossible to fill the transfer. I’ll take a photo when I get home

[r32-25t]

Have got all the bushes out and most of them back in, threw some paint over everything and it’s pretty much ready to be put back together it’s all just good old pressure pack gloss black, hopefully can start assembling very soon cause o have under a week till roll racing 

[r32-25t]

Had a big day today stared with the cross member threw the diff inthen fitted the whiteline sway bar and put it on the jacks before it got to heavy

[r32-25t]

then the lower control arms and set the sway bar to softthen the upper arms then the hubs and shafts and it’s ready to go back in, just have one other job before I can do that