Jump to content
SAU Community

Recommended Posts

4 hours ago, Shoota_77 said:

@r32-25t where did you get your coolant swirl pot from?  It's a very nice bit of kit. 

Be prepared to wait for months and be ghosted by the manufacturer 

  • Like 1
4 hours ago, Shoota_77 said:

@r32-25t where did you get your coolant swirl pot from?  It's a very nice bit of kit. 

It’s the hypertune one, they give you the option of being in front of or behind the strut tower. 

  • Like 1
40 minutes ago, Dose Pipe Sutututu said:

Be prepared to wait for months and be ghosted by the manufacturer 

 the radiator didn’t take to long and arrived pretty close to the estimated time that they gave me

3 hours ago, Dose Pipe Sutututu said:

Be prepared to wait for months and be ghosted by the manufacturer 

They've got about 5 years to make it which is approximately when my car will see the road again....

  • Haha 3
3 minutes ago, Shoota_77 said:

They've got about 5 years to make it which is approximately when my car will see the road again....

I hope by the time you car is running, I will no longer own my Nissan shit box.

We all can hope and dream, it keeps us feeling alive :D 

  • Haha 4
5 hours ago, Dose Pipe Sutututu said:

I hope by the time you car is running, I will no longer own my Nissan shit box.

We all can hope and dream, it keeps us feeling alive :D 

I hope to trade my shit box in for a new lotus Emira, be nice to have a car I can actually drive and enjoy

 

IMG_9962.jpeg

  • Like 2
1 hour ago, Old man 32 GTR said:

I hope to trade my shit box in for a new lotus Emira, be nice to have a car I can actually drive and enjoy

 

IMG_9962.jpeg

And do wild lap times, and then head home with the same tank of fuel and not get carjacked or cops fisting you or neighbours sending your car details to the EPA.

 

11 hours ago, Dose Pipe Sutututu said:

And do wild lap times, and then head home with the same tank of fuel and not get carjacked or cops fisting you or neighbours sending your car details to the EPA.

 

In 10 years time, own anything that runs on petrol and you'll be fisted by the EPA, PETA, and the Greens :P

  • Haha 1

Also, still waiting on diagnosis as to what let the coolant out...

I'm presuming you only filled, and werent pressure testing, so worst case is something like Welch plug not in correctly or missing... However, I suspect something more normal, like, someone forgot to connect a heater hose to the heater box properly, or missed one of the many random lines under the plenum. And that's making Brett consider just selling the whole thing rather than trying to get back under the plenum in a GTR to fix a fiddly hose :P

40 minutes ago, MBS206 said:

It will when they line up preparing to ban petrol vehicles outright...

Then hopefully they word the rules in a way, they mention petroleum, fossil fuels, etc.

That would mean 100% ethanol is fine!

Back to Brett's leak, I reckon send its mum to the moon with RTV. Just don't do what Subaru did and leave bits of RTV everywhere lol.

1 hour ago, MBS206 said:

Also, still waiting on diagnosis as to what let the coolant out...

I'm presuming you only filled, and werent pressure testing, so worst case is something like Welch plug not in correctly or missing... However, I suspect something more normal, like, someone forgot to connect a heater hose to the heater box properly, or missed one of the many random lines under the plenum. And that's making Brett consider just selling the whole thing rather than trying to get back under the plenum in a GTR to fix a fiddly hose :P

I wish it it was that easy, being a billet block there’s no Welch plugs in it and pretty much every line under there is gone now and the remaining water hoses are bmrs because of converting it to dbw 

6 hours ago, r32-25t said:

And no I didn’t pressure test it, at least it didn’t come back out as fast as I put it in but still didn’t require any pressure 

So where is it coming from? 

13 hours ago, Old man 32 GTR said:

So where is it coming from? 

I hadn’t got much of a chance to look at it properly as it was dark when I filled the water. When I finally did it appears to be coming from behind the housing that the water pump and thermostat attach to. 
IMG_6428.thumb.jpeg.4f91f6d070fecd5e22f0969ee24f32d8.jpeg

 

  • Like 1

IMG_9722.thumb.jpeg.4e6033efd15f4c2599098474a9e239b5.jpeg

The engine is stripped down and the housing removed 

IMG_9723.thumb.jpeg.fea49db43ead9d72d0aacc2470cc3d67.jpeg

this oring is the the culprit (so I thought) and I smeared it with rtv and fit it back on. A few days later I fitted the parts that allowed me to fill the water and out comes the water again 😡turns out by doing what I did I just moved the leak further up the block 

  • Like 2

Bummer...

Is that a groove in the o-ring?  Is there a lip or a gasket protruding that is cutting into the o-ring?

image.thumb.png.e65a4081fd254a5a8f0da85e02c5c18d.png

 

Also, good to see you're wearing Chinese safety boots.  Too cold down here in Victoria for those at the moment! 🤣
 

image.png.b53abfd8aabdd661b3f63990a5a4fa21.png

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...