Jump to content
SAU Community

Recommended Posts

25 minutes ago, MBS206 said:

Evidence girls always fall for shiney things :P

 

Brett, I do NOT envy you when you're going to have to try and keep that shiney!

Just lick it clean.

1 hour ago, MBS206 said:

Evidence girls always fall for shiney things :P

 

Brett, I do NOT envy you when you're going to have to try and keep that shiney!

What it’s supposed to do is go like polished copper colour once it gets some heat through it 

  • Like 1

Hey Brett,

Before you even get this running, I've found you an upgrade I think you need to order...

 

https://www.facebook.com/100064809843530/posts/846738300829824/?mibextid=rS40aB7S9Ucbxw6v

 

And it's made locally to you too!

 

Go on, you know you want one to match the billet block...

  • Haha 1
5 hours ago, MBS206 said:

Hey Brett,

Before you even get this running, I've found you an upgrade I think you need to order...

 

https://www.facebook.com/100064809843530/posts/846738300829824/?mibextid=rS40aB7S9Ucbxw6v

 

And it's made locally to you too!

 

Go on, you know you want one to match the billet block...

Someone already beat them to it and made a billet rb26 head and had it on display at gtr fest 

IMG_0443.thumb.jpeg.11a20791c74065ac64ed63998eca7251.jpeg

Took a little trip 

IMG_0687.thumb.jpeg.84503d6f9734caa01b6f51de21a3f10d.jpeg

went to nismo hoping the get my fuel tank hoses and unfortunately they told me they didn’t have stock

IMG_1025.thumb.jpeg.10605a4f6b66c841fc3c11c3dbe7c204.jpeg

luckily I was able to go to a Nissan parts store and they were able to order them in for me 

IMG_1116.thumb.jpeg.fd07de853decd1fe058d3aa19bd42f5f.jpegIMG_1117.thumb.jpeg.40f4d1a52e2d0e78391e092c77d51ac1.jpeg
then can home and cleaned the tank with some degreaser and fitted the new hoses before putting it back in the car 

  • Like 4
  • 2 weeks later...
4 minutes ago, r32-25t said:

IMG_1118.thumb.jpeg.2406d1f40410362b3ca02dc622f14da0.jpeg

put the front bar back on so I can measure the new spot for the oil cooler 

IMG_1125.thumb.jpeg.88a3e4b5820be633a2b25f940041990e.jpeg

sitting in its new spot waiting for the hoses to come back from being crimped 

I like your garage!

  • Like 1

Front bar is attached for the good now IMG_1151.thumb.jpeg.89d86ae99a460d79d1b71e9b4bb00d39.jpeg

put the head lights back in 

IMG_1165.thumb.jpeg.c59bbddd301eb0b4ac0b229e7c028487.jpeg

decided a new set of blinkers would make it look fresh 

IMG_1170.thumb.jpeg.56093bf984915b972dbcd4166416a18b.jpeg

fitted them along with a new set of clips for the front grill and now it looks like a car again 

IMG_1173.thumb.jpeg.f40b22bee13e1ba20de08e3804c8830d.jpeg

even fitted the volks back on 

  • Like 1

IMG_1164.thumb.jpeg.19c5fbda441dab32111192ba1e696046.jpegIMG_1192.thumb.jpeg.0a429203d9476510821701674e518c45.jpeg

more new rubbers and to add to the mix 

IMG_1191.thumb.jpeg.c14501736c09b0c9d1ff2b7d3abb2e3e.jpeg

also new bolts for the center garnish

IMG_1193.thumb.jpeg.f17bd8b2b168e0c8a50813685ad098cb.jpeg

and pretty much all done, the alarm is being replaced and I’ll deal with that ugliness when that happens 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...