Jump to content
SAU Community

Recommended Posts

25 minutes ago, MBS206 said:

Evidence girls always fall for shiney things :P

 

Brett, I do NOT envy you when you're going to have to try and keep that shiney!

Just lick it clean.

1 hour ago, MBS206 said:

Evidence girls always fall for shiney things :P

 

Brett, I do NOT envy you when you're going to have to try and keep that shiney!

What it’s supposed to do is go like polished copper colour once it gets some heat through it 

  • Like 1

Hey Brett,

Before you even get this running, I've found you an upgrade I think you need to order...

 

https://www.facebook.com/100064809843530/posts/846738300829824/?mibextid=rS40aB7S9Ucbxw6v

 

And it's made locally to you too!

 

Go on, you know you want one to match the billet block...

  • Haha 1
5 hours ago, MBS206 said:

Hey Brett,

Before you even get this running, I've found you an upgrade I think you need to order...

 

https://www.facebook.com/100064809843530/posts/846738300829824/?mibextid=rS40aB7S9Ucbxw6v

 

And it's made locally to you too!

 

Go on, you know you want one to match the billet block...

Someone already beat them to it and made a billet rb26 head and had it on display at gtr fest 

IMG_0443.thumb.jpeg.11a20791c74065ac64ed63998eca7251.jpeg

Took a little trip 

IMG_0687.thumb.jpeg.84503d6f9734caa01b6f51de21a3f10d.jpeg

went to nismo hoping the get my fuel tank hoses and unfortunately they told me they didn’t have stock

IMG_1025.thumb.jpeg.10605a4f6b66c841fc3c11c3dbe7c204.jpeg

luckily I was able to go to a Nissan parts store and they were able to order them in for me 

IMG_1116.thumb.jpeg.fd07de853decd1fe058d3aa19bd42f5f.jpegIMG_1117.thumb.jpeg.40f4d1a52e2d0e78391e092c77d51ac1.jpeg
then can home and cleaned the tank with some degreaser and fitted the new hoses before putting it back in the car 

  • Like 4
  • 2 weeks later...
4 minutes ago, r32-25t said:

IMG_1118.thumb.jpeg.2406d1f40410362b3ca02dc622f14da0.jpeg

put the front bar back on so I can measure the new spot for the oil cooler 

IMG_1125.thumb.jpeg.88a3e4b5820be633a2b25f940041990e.jpeg

sitting in its new spot waiting for the hoses to come back from being crimped 

I like your garage!

  • Like 1

Front bar is attached for the good now IMG_1151.thumb.jpeg.89d86ae99a460d79d1b71e9b4bb00d39.jpeg

put the head lights back in 

IMG_1165.thumb.jpeg.c59bbddd301eb0b4ac0b229e7c028487.jpeg

decided a new set of blinkers would make it look fresh 

IMG_1170.thumb.jpeg.56093bf984915b972dbcd4166416a18b.jpeg

fitted them along with a new set of clips for the front grill and now it looks like a car again 

IMG_1173.thumb.jpeg.f40b22bee13e1ba20de08e3804c8830d.jpeg

even fitted the volks back on 

  • Like 1

IMG_1164.thumb.jpeg.19c5fbda441dab32111192ba1e696046.jpegIMG_1192.thumb.jpeg.0a429203d9476510821701674e518c45.jpeg

more new rubbers and to add to the mix 

IMG_1191.thumb.jpeg.c14501736c09b0c9d1ff2b7d3abb2e3e.jpeg

also new bolts for the center garnish

IMG_1193.thumb.jpeg.f17bd8b2b168e0c8a50813685ad098cb.jpeg

and pretty much all done, the alarm is being replaced and I’ll deal with that ugliness when that happens 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...