Jump to content
SAU Community

Recommended Posts

From what i've driven, high comp makes the boost instant, full song around 4k till 8-8.5, which is alright with hondie ratios

Car is 1ton like pulsars, 2L plentyful off boost, gets off line really easy, but then we're drifting off to the silvia vs skyline chassis hear

From what I'm seeing in that graph, definitly not peaky, lots of usable power

Referring to the 300kw one above, is similar set up to mates integra.

Im just bored ok

felt like spamming

f*k yas

4000rpm =/= instant

tweeked Std turbo here.. with a BOV that promises 15% better response again...(not the reason i bought it) that's as good as response as your really going to get.

and I can light them up at 30 in 3rd..(on the deca skid pan with a kick and maybe a puddle)

4000rpm =/= instant

Different things

there "turbo lag" where how long it takes for the turbo to spool up as soon as you step on it (say at 5000rpm you should be at full boost, you're cruising at 5000 cause you're deaccel, then you punch the gas, the lag time between none to full boost)

and "turbo lag" where how early in the rev range full boost is experienced

So easy to hit 4000rpm with honda ratios, heck we sit at 3.5k rpm at 100 in 6th with a type r box

If I'm driving hard and want good response:

Step 1 is BEING IN THE RIGHT GEAR!
You don't need power at 2000rpm, you should have already downshifted two gears and getting it into the peak power band of the engine/turbo setup.

So for me, response isn't about RPM, it's how long the turbo it takes to come onto full boost when I stomp the loud pedal and I'm already at 5000rpm.

A decent power curve is nice below there, makes everything nicer on the street. But don't expect to make balls to the wall power AND have all the power down low in a turbo car, or it'll run out up of go after you get above the midrange (which is where you'll be if you want to go fast)

I'm talking about manuals of course, because fk autos

If I'm driving hard and want good response:

Step 1 is BEING IN THE RIGHT GEAR!

You don't need power at 2000rpm, you should have already downshifted two gears and getting it into the peak power band of the engine/turbo setup.

So for me, response isn't about RPM, it's how long the turbo it takes to come onto full boost when I stomp the loud pedal and I'm already at 5000rpm.

A decent power curve is nice below there, makes everything nicer on the street. But don't expect to make balls to the wall power AND have all the power down low in a turbo car, or it'll run out up of go after you get above the midrange (which is where you'll be if you want to go fast)

I'm talking about manuals of course, because fk autos

Hehe, i like how we both used 5k rpm :rolleyes:

What car you driving these days Jonoe?

stock dc2r for daily, ek going under some works but will take a while since most of my money just went into holidays. Graduate end of this year :D

What's a pulley upgrade?

:rolleyes:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Dear folks My family members have 4 different cars : Triton 2015 and Corolla 2011 and Mazda3 2012 and Hyundai Elantra 2014 Looking to buy engine oil funnel spill free What I found are are below  https://www.amazon.com/gp/aw/d/B0BBTTJNKX?ref=ppx_pt2_mob_b_prod_image&th=1 https://www.ebay.com.au/itm/145553221359?srsltid=AfmBOoqYBU6Ptw0LU_bAp_k67U3qkF97HHvePkA7iHZw8vUmiwoIRaRr https://www.amazon.com/gp/product/B09X23TCS5?th=1 Is there a funnel with attachment that fits most cars ? Don't mind to spend for a decent quality  Thx  
    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
×
×
  • Create New...