Jump to content
SAU Community

Recommended Posts

nah, it came across that way for sure, but it was a reference to the logical progression to business bank manager from my current role

I'm not moving at the moment as the work life balance is off the chain and it works well with my youngest

my car is working

its time to start making massive changes

This is the same car that always fails, that the other day you advised has been running daily for 6 months, that is now running again?

you are a confusing guy Greg

The same? The only oddity I've ever noticed is that from switching between E85 and 98 it seems to bring up some kind of residue that likes to clog my fuel filter (which is removable and cleanable).

To be honest though, having 400kw at 4500RPM is kind of pointless (cause grip) so really I should be just running 98 all the time cause there's no practical loss of anything in switching between them.

Trying to tune them though you notice quick smart which is the better fuel. That alone makes me want to daily it on E85 tbh, its just a far better fuel, the car is just far, far happier to run on it. Smoother, way less charge temps on intake, etc. I'd personally want to use it when driving hard even if the power increase was 0.

As for winter start being problematic, is an E85 myth. Couple of cranks (literally 2) and good to go.

  • Like 2

I think the cold start 'myth' is more for people that don't use the car every day.. my brothers r33 on e85 was a weekender and just an absolute pig.. now its collecting rust on the side of my parents house with good advan forged rims on it.. (also probably getting rusty)

See it on the XR6's as well, half the people say its fine the other half say it's a bitch to start in the cold.. same shit, different car.

Not really worth it with my boost levels on the v8 so 98 ftw

Once I put some more cash into my falcadore should be good fun :) so over the power it has atm.. except in the wet it's a handful

YOLO, more power time

Edited by UNR33L

Very much depends where the car is stored and the temp you're starting it at

In the carpark beneath apartment complex, mine can be a bitch if it's gone down to 4 degrees overnight - talking 10-12 cranks. Haven't bothered to get the cold start tuned properly. Normal winter day after not having driven for 24 hours is about 2-3 cranks most.

Sitting at 95k Qantas frequent flyer points, almost enough to go LA return or similar :) not bad for 6 months

ANZ FF amex black + business related expenses ftw

Edited by UNR33L

Sitting at 95k Qantas frequent flyer points, almost enough to go LA return or similar :) not bad for 6 months

ANZ FF amex black + business related expenses ftw

Please don't

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...