Jump to content
SAU Community

Recommended Posts

nah, it came across that way for sure, but it was a reference to the logical progression to business bank manager from my current role

I'm not moving at the moment as the work life balance is off the chain and it works well with my youngest

my car is working

its time to start making massive changes

This is the same car that always fails, that the other day you advised has been running daily for 6 months, that is now running again?

you are a confusing guy Greg

The same? The only oddity I've ever noticed is that from switching between E85 and 98 it seems to bring up some kind of residue that likes to clog my fuel filter (which is removable and cleanable).

To be honest though, having 400kw at 4500RPM is kind of pointless (cause grip) so really I should be just running 98 all the time cause there's no practical loss of anything in switching between them.

Trying to tune them though you notice quick smart which is the better fuel. That alone makes me want to daily it on E85 tbh, its just a far better fuel, the car is just far, far happier to run on it. Smoother, way less charge temps on intake, etc. I'd personally want to use it when driving hard even if the power increase was 0.

As for winter start being problematic, is an E85 myth. Couple of cranks (literally 2) and good to go.

  • Like 2

I think the cold start 'myth' is more for people that don't use the car every day.. my brothers r33 on e85 was a weekender and just an absolute pig.. now its collecting rust on the side of my parents house with good advan forged rims on it.. (also probably getting rusty)

See it on the XR6's as well, half the people say its fine the other half say it's a bitch to start in the cold.. same shit, different car.

Not really worth it with my boost levels on the v8 so 98 ftw

Once I put some more cash into my falcadore should be good fun :) so over the power it has atm.. except in the wet it's a handful

YOLO, more power time

Edited by UNR33L

Very much depends where the car is stored and the temp you're starting it at

In the carpark beneath apartment complex, mine can be a bitch if it's gone down to 4 degrees overnight - talking 10-12 cranks. Haven't bothered to get the cold start tuned properly. Normal winter day after not having driven for 24 hours is about 2-3 cranks most.

Sitting at 95k Qantas frequent flyer points, almost enough to go LA return or similar :) not bad for 6 months

ANZ FF amex black + business related expenses ftw

Edited by UNR33L

Sitting at 95k Qantas frequent flyer points, almost enough to go LA return or similar :) not bad for 6 months

ANZ FF amex black + business related expenses ftw

Please don't

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
    • Assuming your brake pads are not worn right down, I'd add a little brake fluid. Is there any sign of a brake fluid leak?
    • Hello all,  I need of some help. On my drive home my handbrake light lit up and started flashing. When I got home I checked my handbrake sensor under the centre console and nothing seemed out of the ordinary. I have scanned my car via the consult port, no codes shown. Checked my brake fluid as well which is half full. Tried unplugging the brake master but it didn't change anything. Thoughts on what it could be? The master float doesn't seem to be stuck. My car is an 1998 ER34 sedan GT. No hicas but has ABS Photos below 👇🏾 
×
×
  • Create New...