Jump to content
SAU Community

Recommended Posts

5 hours ago, emts said:

how do you install it?

my current shift light is not giving me much joy

its like power/neg/rpm signal.

Not hard. pulsar was not a typical setup, so i never got it running, but someone else with a pulsar did. i dunno. I dont need it anymore. so its $40 if you want it. Got manual and box for it, maybe 30cm of wire and its the flat type, not the curved type. its quite a good unit. can set custom rpm increments and will use lights to show battery voltage when on Acc.

 

Also f**k this hotel internet. uses a Mikrotik router of some sort... using a release from 2015 so it cant be that old... repeated speedtests says everything is fine, pulls decent speed, but every 10mins or so it just wont load webpages. I had a download running and it was stable at 200kbs, then spiked to 1000. all the while google would time out. Owner says the router cuts you off if you breach 500mb in an hour, but i can barely use it for 5mins without problems.

1 hour ago, dezz said:


That stuff is stored on a separate drive

Is that another dock I need, or are they the same pin set up as a normal hard drive...?

depends on what SSD you have, the normal "sata" ones are same pin setup as hard drives though yes. 

Types-of-SSDs.png

On 5/2/2017 at 1:08 AM, Birds said:

Got a source for RS6 quartermile times? That sounds optimistic to me for the V10 model. Regardless, none of that negates my point that the same results can be achieved for substantially less in a probably more reliable and cheaper to repair way.

Also struggling with 12 second flat from R/S3 with just that. I'd believe breaking into the 12s...but am feeling a turbo swap to get a high 11 out of them. They would need another 100kw at least...

High 11's is doable with EA888 MQB platform motors, EA113 like mine, I reckon it isn't possible, but could be wrong... One way to find out hey? 

On 5/2/2017 at 9:43 AM, Birds said:

Wow if that is the stock turbo...are they laggy or just amazing tech?

F6 seems to do similar stuff with flash tune and exhaust

I imagine life gets very expensive once you go beyond that for the Golf

Stage 1, 2 are with stock turbo. Upgraded turbo is considered stage 3. Poofy I know. If you see people with MK5 GTI or MK6R with a "+" that means high pressure fuel pump upgrade on top of the tune. 

On 5/2/2017 at 11:27 AM, blah_blah said:

So what power does a stock Golf R make?

And what power does one with a tune, exhaust and cooler make and cost?

Damn so many golfs on the street these days they will just cream me i spose lol

 

Ive been in a launched Golf R and it was quick from a launch but died down afterwards

 

At wheels, 165-170kw (at least with MK6 - dunno about MK7)

On 5/2/2017 at 11:29 AM, TiTAN said:

 


They are a big stock turbo compared to what they tune it to. In "stage 2" trim you are around 250kw at the wheels. So it doesn't really hit hard until 3000-3500.

 

Yep, Golf R has K04 from factory (at least with MK6), 250 is pushing it, I'd say 230-240 at wheels with 2+ (plus intercooler, DV, and maybe actuator).

On 5/2/2017 at 11:40 AM, blah_blah said:

250awkw with a cooler zort and tune wow. How does the DSG hold up

 

Should have bought the wife a Golf R not an Evo X

Apparently the stock clutch packs in 6 speed DSG as found in GTI/R/GTD/TDI can handle 600 crank HP. 

As for daily driving, DSG is brilliant. Drives like a auto and will do compression braking if you're driving steep hill downwards. Although DSG reprogram would be ideal, its bit "lazy" when you want to do overtakes or something.

I should make mine faster and that means $$$$

On 5/2/2017 at 11:50 AM, TiTAN said:

 


Not sure about the dsg, the dry clutch 7 speed boxes aren't known for their reliability but the 6 speed wet clutches seem to go ok, but I'm not sure how they go at that power level.

 

Read above. And mine has done nearly 142k kms (I drive it every day) and it's faultless*, go wet clutch DSG. 

/proudoutofwarrantygolfr

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*touch wood. 

not near near future, unless a deca comes up, 

 

gathering a few parts to fix/upgrade  a couple things in prep for later in the year.

expecting house Oct  so any time after then as I will have somewhere to store/work on car

 

It's not living with me currently so makes it hard

 

On 03/05/2017 at 10:31 AM, Birds said:

My prediction of 88E falling post spud (a nothing event) came true

seems like its pretty solid at 0.045. An order there will probably sit there for a week or more until theres a dump for no reason.

still got a while to go. I'll sit and wait till after tax time. No more buying for me. Need to focus on my MMA gambling side gig. live betting online is quite lucrative.

So just got a over due notice from foxtel..

 

for 1 cent....

yeah that was worth them sending a letter and not just adding to the next bill

 

(must have had a typo when paying last one and put 13c at end not 14..)

 

 

19 hours ago, Leroy Peterson said:

Also f**k this hotel internet. uses a Mikrotik router of some sort... using a release from 2015 so it cant be that old... repeated speedtests says everything is fine, pulls decent speed, but every 10mins or so it just wont load webpages. I had a download running and it was stable at 200kbs, then spiked to 1000. all the while google would time out. Owner says the router cuts you off if you breach 500mb in an hour, but i can barely use it for 5mins without problems.

 

Sounds like there is Per User Shaping and quota...

If you're going through 500mb in 5 minutes, turn down the quality of the video until it all looks like japanese porn.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
×
×
  • Create New...