Jump to content
SAU Community

Recommended Posts

A sensible setup. 250-300kw is really the perfect setup for the 25, not so much that its unusable without jail time and sensible enough that you can still use it normally without it being a complete pig.

My evo 7 had a 3082 with a 1.06 rear on it, it was a complete dog below 4 and didn't hit full boost until 5.5. Ridiculous turbo choice by the previous owner, hilarious and fun but ridiculous none the less.

Was much better when I changed it to a high flowed stock turbo, was all on at 3500 and made almost the same power.

Mid size high flows are the way to go - improve a vehicle's power decently and leave it at that for reliability, tractability and usability.

When choosing my turbo I drove Hypergear's 340kw 33 that took until 4500rpm to actually get anywhere and then it wanted to eat a gutter. He asked me if I liked the power...I said no man, make me a turbo that comes on quickly instead of this, so he did. Haven't looked back - convinced my turbo is what these cars should have come with from factory!

There is more to performance than dyno charts

I just said centrifugal chargers have their benefits which aren't immediately apparent.

Midrange kick is pointless if you are breaking traction there. Seperating your stuff from being tied to your exhaust manifold is also nice.

The smart answer if modding a RWD skyline for power is immediately LS convert it.

26 minutes ago, Kinkstaah said:

There is more to performance than dyno charts

I just said centrifugal chargers have their benefits which aren't immediately apparent.

Midrange kick is pointless if you are breaking traction there. Seperating your stuff from being tied to your exhaust manifold is also nice.

The smart answer if modding a RWD skyline for power is immediately LS convert it.

Does it ever bother you that there are absolute f**kwits out there who wouldn't know a tenth of what you do about cars, driving 500kw GTRs up and down bypass that never miss a beat

  • Like 2
9 hours ago, Birds said:

Mid size high flows are the way to go - improve a vehicle's power decently and leave it at that for reliability, tractability and usability.

When choosing my turbo I drove Hypergear's 340kw 33 that took until 4500rpm to actually get anywhere and then it wanted to eat a gutter. He asked me if I liked the power...I said no man, make me a turbo that comes on quickly instead of this, so he did. Haven't looked back - convinced my turbo is what these cars should have come with from factory!

I must agree since i also have a highflow. aka - best skyline turbo ever, lol.

7 minutes ago, UNR33L said:

But I wouldn't want a 250km range or cold start issues :P

300km thank you very much. No cold start issues here, even on freezing cold mornings. Getting the cold start crank and post crank settings right is the key to cold starts on e85. Flex fuel = best of both worlds.

9 hours ago, Birds said:

Does it ever bother you that there are absolute f**kwits out there who wouldn't know a tenth of what you do about cars, driving 500kw GTRs up and down bypass that never miss a beat

I live right next to Glenny Kebabs and I hate this quite a bit at times :P (so many stanced golf R's holy shit)
I originally wanted to buy a Supra and could have, back in the day.
Would have done a lot more driving I assume, but wouldn't have (needed to) learn anything at all.
There is an element of fun to learning stuff, and there's always more stuff to break learn from

Only problem with E85 is that it allows you to push so hard on the tune you will break the next thing up the chain as it will never ping.

This ain't so good if you have metal head gaskets, head studs, stronger pistons, rods, crank because when they aren't the weakest point you end up Gregging it™

98 isn't a bad idea as it stops you from going too insane, its a built in safety measure of sorts to make sure the rest of your setup is actually going well. E85 is like fuel-steroids. You can get the 'right' power on 98 in a Skyline at least to the point where everything else starts to become a limitation. You may not get forum and instagram #efame but you will be able to have fun with the vehicle and have a modicum of reliability and do more than hardpark it and fap over a dyno sheet if you go full retard with timing. (or full advance on timing, really)

50 minutes ago, admS15 said:

300km thank you very much. No cold start issues here, even on freezing cold mornings. Getting the cold start crank and post crank settings right is the key to cold starts on e85. Flex fuel = best of both worlds.

Yeah flex seems like a good idea on paper, I'd want to have complete confidence in the tuner though! 

I think an STI would be more like 250km, those tanks are small af. Been looking into getting a Subi

Edited by UNR33L
1 hour ago, Kinkstaah said:

This ain't so good if you have metal head gaskets, head studs, stronger pistons, rods, crank because when they aren't the weakest point you end up Gregging it™

Going to remain silent on the Gregging it™ front, as the last track day that we were at together didn't end well for me and you came out unscathed

34 minutes ago, Odium said:

Going to remain silent on the Gregging it™ front, as the last track day that we were at together didn't end well for me and you came out unscathed

Whaaaa? What happen?

Everyone I was with that day was super happy they could lend the helmet you offered. You're the shining pinnacle of "Track day people are awesome!!" in their eyes. I did not know things went badly. Please tell me you didn't split a block due to aggressive timing due to magic E85 :P

2 hours ago, UNR33L said:

Yeah flex seems like a good idea on paper, I'd want to have complete confidence in the tuner though! 

I think an STI would be more like 250km, those tanks are small af. Been looking into getting a Subi

For me, it's been just as good in practice as it has been on paper. As far as the tuner, you'd want to have confidence in a tuner doing anything to your car even if it's not e85 related. Since going e85, ive had no issues to speak of. I run a tank of 98 every 3-4 months, followed by a change of fuel filter. Has worked well so far. I also drive my car daily, so the fuel never gets enough time to absorb water and turn things to shit. Knock on wood that by saying that i wont be in the gregging it(tm) club.

1 hour ago, Kinkstaah said:

Whaaaa? What happen?

Boost or Intake leak = overboosting turbo (correct psi by the time it got to the engine) = overheated turbo = warped / cracked exhaust manifold. My day was over by midday.

No worries about the helmet, never put blocks in place that stop people from getting out onto the track. We've got future track day participants to take care of!


Edit: 

 

88e positive news from update = up it goes, tomorrow back down again 

Give it till the 22nd for results... At the moment its happy building solid base, im happy it hasnt gone spastic high and then everyone dumps within 24hours.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...