Jump to content
SAU Community

Recommended Posts

Need a new suit.
Mostly middle class formal event use. Handful times a year. Maybe a work function or interview or two. Don't want to spend a fortune, but don't want "cheap". Prefer local than sending measurements overseas....
Recommendations? Suggestions?

Need a new suit.
Mostly middle class formal event use. Handful times a year. Maybe a work function or interview or two. Don't want to spend a fortune, but don't want "cheap". Prefer local than sending measurements overseas....
Recommendations? Suggestions?


Bosini $150 suit or grab a branded one on sale from myer or something normally something 50%off
17 hours ago, Leroy Peterson said:

What sort of issues do people have if plugs too cold? If I run 8's on the street... Would I be better off saving 8's for track days only?

As said, fouling of plugs but also forced induction cars will run like balls until they heat up properly. 8 sounds excessive. You should run as hot as you can before spark starts to break down. Used to run 5s and they were awesome for quick warm up, but they started wearing out too quickly and losing performance. Now I run 6s on the street and there isn't a great deal of difference in the warmup but the headroom at high rpm is much better.

Used to run 7's. Would misfire on Sandown straight after 2-3 laps. Car needs a good 5-10mins of warmup anyway, had no issues with 8's on the street. Replace the plugs almost every service. No Fouling. I always supply spares when going to a tuners and no one mentioned anything about too cold.

 

Currently running 6's since switching to CDI, so we'll see what happens.

 

 

31 minutes ago, Leroy Peterson said:

No one else with suit recommendations? Martin? Rick?

 

only ever bought one suit off rack. and it was a nasty one when I was at uni.

 

tailored all the way. 

I go to him in HK as easier for me but in in AU around sept/oct most years

 

http://www.lktailor.com/bespoke-tailor-in-australia.html

 

 

2 hours ago, Leroy Peterson said:

No one else with suit recommendations? Martin? Rick?

M8 unless your going down the red carpet for an Oscar nomination, a fitted $150-$300 suit is fine.

 

Aint nobody going to be able to tell the difference cept Rick in his Gucci suit

  • Like 1

So when you say fitted, how does that work at Myers? Buy it, then get it altered elsewhere?

Only suit I've ever bought was like $300 or so for wool (wool blend maybe?) at like an outlet and fitted it there.

I don't mind forking out for quality, even I can spot a shiny nylon-like suit. But yeah, $1000 is pushing it. Will need a shirt to go with it... Peter Jackson generally has broad range of sizes...

6 minutes ago, Leroy Peterson said:

So when you say fitted, how does that work at Myers? Buy it, then get it altered elsewhere?
Only suit I've ever bought was like $300 or so for wool (wool blend maybe?) at like an outlet and fitted it there.

Fitted as in a slim fit that will taper off to the waist. Not like a big classic suit where you look like a kid rocking up to his first interview.

Material shouldn't be too thick also.

I buy my suits straight up without any tailoring required. Quality never had an issue with given i wear it Monday to Friday at work

 

Tailored is better but surplus to your requirements

Just buy off the rack and have it altered, make sure it's 100% wool (anything above $300 generally will be)

try TM Lewin, Rhodes and Beckett - both have sales atm. Otherwise the upper end of Myer suits / Peter Jackson will be ok

and FFS don't fasten the bottom button

Get one of the fly in fly out tailors to measure you up...so worth it. Once you've had tailored it's difficult to go back. Only problem is if your body shape changes over time...

I think last time I did that I got the suit and two Egyptian cotton shirts for $400-450 with a couple of ties thrown in.

Fitted as in a slim fit that will taper off to the waist. Not like a big classic suit where you look like a kid rocking up to his first interview.
Material shouldn't be too thick also.
I buy my suits straight up without any tailoring required. Quality never had an issue with given i wear it Monday to Friday at work

Im kinda surprised you can get it off the shelf with your shoulders and height.
I struggle with getting shoulder width to match neck thickness, then pants length with waist. Damn people are either too skinny, too tall to too big. And im none of those.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...