Jump to content
SAU Community

Recommended Posts

36 minutes ago, joeyjoejoejuniorshabadoo said:

Didn't go hard enough

Would like a free rental out of them

If they don't come to the table they will cop the unhinged abuse and a 1 star google review that will surely destroy their business model

Yep, you need to give them time to get quotes and charge your card first...

I've noticed a few times that airport pickups are from undercover, but dropoffs are more often out in the sunlight... Much easier to see scratches and stuff in the sunlight, so you do miss a lot of things during the pickup inspection.

In Thailand we got some nice new scooters for a few days, only 1000km on them, we made the biggest show of taking dozens of photos of each one. They didnt try anything when we returned them...

To be fair, Eric didn't wait my mandated 24 hours before sending me a letter of liability or deliver on my requirement for pure Cambodian breast milk to accompany bullshit that comes my way; if they don't play by my rules I won't play by theirs.

13 minutes ago, Odium said:

Yep, you need to give them time to get quotes and charge your card first...

I've noticed a few times that airport pickups are from undercover, but dropoffs are more often out in the sunlight... Much easier to see scratches and stuff in the sunlight, so you do miss a lot of things during the pickup inspection.

In Thailand we got some nice new scooters for a few days, only 1000km on them, we made the biggest show of taking dozens of photos of each one. They didnt try anything when we returned them...

We were silly and didn't take photos when hiring jetskis in Bali...lucky we had decent, genuine guys who seemed happy we were having such a blast. Might have helped we bought other shit from them and that they were close to a hotel so semi-official. I've heard if you book through a hotel you're a bit less likely to get ripped off.

1 hour ago, blah_blah said:

Post scenario and photos on their FB page.

Get likes and shares and shitstrom erupts.

Get a free R33 rental for at least 5 years.

Their Facebook is a litany of similar complaints and templates apologies from them promising to follow up with the appropriate branch - my guess is they couldn't give a shit about one more

This is lulzworthy though

http://www.heraldsun.com.au/leader/inner-south/viral-video-shames-south-melbourne-thrifty-car-rental-over-fuel-fight/news-story/04e7db536220889096e1f572d29f10c9

LOL

Wasteland providing the goods it's like the ye old times. 

Birds definitely blast it on their FB that's complete BS.. I'll remember to take photos of any rental now.. never done it in the past, noob mistake obviously!  

88E jumps 17% and closes 3.5 cents after being so stable for the last couple months...something brewing? We are approaching well re-opening date...

Did say to buy in when it was 1.8 cents, for the inevitable climb before the well opens again!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
×
×
  • Create New...