Jump to content
SAU Community

Recommended Posts

34 minutes ago, Leroy Peterson said:

So what's this about manual boost control vs boost tee? Considering reducing the richness of the Gloria... (by adding boost)

Knowing Nissan ECU's, it'll compensate for the increase in boost by throwing even more fuel in. Are there tunable options for the gloria? Nistune / PowerFC etc?

On 9/13/2018 at 12:31 PM, Leroy Peterson said:

So what's this about manual boost control vs boost tee? Considering reducing the richness of the Gloria... (by adding boost)

Boost tee / bleed valve is a manual boost controller, just a very simple/cheap one shaped like a T. You used to be able to get one by TurboTech(?) for $25 that would allow a couple extra PSI on a stock ecu vehicle and hold it very well. Bargain performance upgrade on most turbo imports from the 90s.

On 9/13/2018 at 1:06 PM, Odium said:

Knowing Nissan ECU's, it'll compensate for the increase in boost by throwing even more fuel in. Are there tunable options for the gloria? Nistune / PowerFC etc?

Until you hit rich and retard and then drive along like you've lost a few cylinders ?

I notice the bargain 32R for sale thread disappeared from the classified section...guessing the new owner wants to resell it without people knowing what it originally went for ?

Knowing Nissan ECU's, it'll compensate for the increase in boost by throwing even more fuel in. Are there tunable options for the gloria? Nistune / PowerFC etc?

Yeah youre probably right :(

Piggyback or full race car standalone with 90% of electrics not working seem to be the two options haha. Like M35, im curious at the locally made M35 modded ECUs, but dont seem to hear much about development anymore. Scotty gone AWOL from sau too
Knowing Nissan ECU's, it'll compensate for the increase in boost by throwing even more fuel in. Are there tunable options for the gloria? Nistune / PowerFC etc?

Yeah youre probably right default_sad.png&key=60edf0cfeb1b5687d093da59e19dcb4bc4ca5078c255acb1c3a47ac6adc5cc5e

 

Piggyback or full race car standalone with 90% of electrics not working seem to be the two options haha. Like M35, im curious at the locally made M35 modded ECUs, but dont seem to hear much about development anymore. Scotty gone AWOL from sau too

 

If i did try a boost tee, i would put it on a dyno probably with cms. If he cant get it going well, maybe his russian contacts can develop something. They managed to make tunes for the latest Nissan cube, which was supposed to be untunable

An guy put a 3000hp billet water jacketed funny car setup in a 57 wagon of some sort and took that to it, they would pull the belt off the Supercharger and tie a breaker bar on the snout to stop it turning, remove the manifolds blast plate and install a throttle body there for a 2nd ecu to run the car on the street. They had some issues with it though.

An guy put a 3000hp billet water jacketed funny car setup in a 57 wagon of some sort and took that to it, they would pull the belt off the Supercharger and tie a breaker bar on the snout to stop it turning, remove the manifolds blast plate and install a throttle body there for a 2nd ecu to run the car on the street. They had some issues with it though.

https://www.autotrader.com/cars-for-sale/vehicledetails.xhtml?listingId=487434773

Now THATs an investment. Signed by Pol Wolker himself. Owned by Frankie Muniz apparently....

It's actually a pretty cool looking car, if it had smaller wheels and more low

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...